dcamp67

It's been mentioned before that black stain is actually made from a blue base, and will have a green 'tint' or 'haze' to it when a yellowing laquer is applied. Wouldn't you be better off dying with a DARK brown and sanding back as a first step if you are looking for that type of finish? I wouldn't want ANY hint of green on a finish like that if were my guitar.....

Thanks for the reply, time to get some maple scraps and a container of oil.......

Have you ever used any tint in this procedure, and couldit be feasable to stain the piece with a water- or oil-based stain before starting the procedure or is it for a "natural" finish only? Thanks in advance.

Good luck on the build Dave. Be sure to post some pics in progress. Sounds like you have your head on straight, just do a mock-up first so you don't mess up your 'good wood'.

Take WWW's advice, swap the nut. It's a good beginner project, anyway.

Tele's have worked fine that way for 50+ years. Go with a "thicker" set of pup's if you are worried about depth to your tone. EMG's if you don't mind actives, Seymore Duncans or DiMarzios if you only want to use passives.

You want a deep sound? Go with mahogany instead of alder, and use EMG's. 81/85 Zack set.

Hey, I like 'em both, too. My wife AND my girlfriend!!!!!

Make a mock-up on a piece of pine first to see if you like the look. It sounds a bit unbalanced to me, but maybe I'm just not picturing it right in my head....

What a good idea!!!!!! Looks like there will be a lot of reflective guitars being built soon....

I've seen on here from several people that it's virtually impossible to add a veneer to a carved top that has drop offs in multiple directions without things like vacuum presses and the like. You can do a veneer to a single direction drop like the arm contour on a strat pretty easily, though. Just wet and bend, glue and clamp. The radius curves make it impossible to wet and bend, because you will end up with a fold somewhere. The best bet if you want to "redo" somthing like what you're talking about it to thickness plane the body down by 3/4" and put a maple cap on, then carve the drop yourself with a router, planes, or sanding. Good luck!

Yo maiden, I know these aren't the answers you want to hear but.... Considering that's an Epi, there is a STRONG possibility that the veneer could be as thin as 1/32 of an inch. If it is that thin, the stain would have penetrated all the way through the veneer to the base wood. If you try to sand that finish off, you run the risk of going through the veneer just getting the stain out. I agree with Maestro, leave it be, and build yourself another with the finish you want. my .02

good idea Agreed. Either that or Myka's semi hollow I could live with that......

A second place amateur is as good as a 1st place Pro??????? Doesn't make sense to me............ Pull it 'till a pro submits in the catagory.

I think, I think it's, I think it's..... it's....... it's....... PEANUT BUTTER AND JELLY TIIIIIIIIIIIIIIIIIIIMMMMMMMMMMMMMMEEEEEEEEEEEEEEEE!!!!!!!!!!!!!!!!!!!!!!!

darren you heartless bastard!! Let the kid have his illusions!!! con't listen to him about the tooth fairy, frankie, just keep putting those teeth under your pillow!!!!!!

there is a certain "competition" going on, where there aren't supposed to be any pics posted until Jan '05. He's "slide stepping" that reg by posting in B/W.

That's pretty honorable, frankie. There are several death metal bands in the Tampa area that do exactly what you are talking about. If that's your dream, go for it. Just be prepared to be sold out and exploited by every swinging dick in the indie industry that wants to make a fourtune at your expense, and leave you with your day job, a few leftover scraps, and your "musical integrity". Good luck, and I'm not being in the least bit sarcastic with you, good luck.

Don't worry frankie, were not picking on you. It won't be until you turn 19 or 20 before you realize you don't know everything, and that the real world sucks because the people in it all pretty much suck. I'm not being a pessimist, but given a chance, most of the people that are out there will screw anyone they don't know just to get one step ahead. That's called survival of the fittest, and it's an ingrained instinct. Darwin described it pretty well. Youth is for being naive, enjoy it while you can. It your band gets signed, your CD will cost $18.99 at FYE just like every other one ther because the record company will make sure it does.

I just hope I'm around to see it when the real world kicks him square in the balls and shows him what reality is. "Any 20 year-old who isn't a liberal doesn't have a heart, and any 40 year-old who isn't a conservative doesn't have a brain. " Winston Churchill (1874 - 1965) English statesman, author

Where did you pick up your spalted? Somewhere accessible from the states? I'm collecting the parts and wood slowly for the next 4-5 projects. The spalted will be for a tele. I'm also planning a lacewood-topped explorer.

California police code for "lunatic on the loose" of something like that. It's also what he named his home studio.

You could easily build one of the fish slappers spalted strats with this piece. Sure wish I had the cash here

No slam needed Rus, I'm done.

Bla, bla bla. If you can't put up, then shut up. Like I already said, a 23 y/o who is God's gift to the f'ing 6-string. I've been playing since Mustaine was in Metallica, I KNOW low end. If you have it , let's hear it, You are coming across her as a know-it-all . Show some props to those with 11,000 post and "Mod" in their title, or you run the risk of being terminally ignored. "Muddy" does not describe KORN in any way, shape, or form. I am not their biggest fan, but their tone is loud and clear. Stop acting like you know everything you're talking about (as a tech-for-hire, in your own description) and begin to learn from the people here. You may actually make a good builder if you put your pride aside for a little while and listen without an attitude. Litch, PM this guy and explain how you are a better person, as well as builder, for demonstrating the strength to admit that you need to learn more, I respect you more for it (and that new avatar!!!)......