Decided it was time to build a King V.
So I bought a cheap King V body from ebay and started making my copy. I then used this project as an excuse to buy a new gibson V for research purposes...
I did mean things to the template guitar. Including screw a 1/4" acrylic sheet to it for a template.
The real King V is made from Padauck, Wormy Ambrosia Maple with Mild Flame, Purple Heartwood, and my enemy Cocobolo. It is going to sport a newer JT580 Jackson trem, Jackson tuning keys and one single Seymour D Custom. CoilTapped with a 500k pushpull. Looks like a Tung oil finish for this one.
The beater JS30 King V is made from mystery wood, and hardboard.
I scored a really nice flamed shark fin Jackson neck for 100 on ebay and a 40 dollar nightmare Jackson neck for the beater.
The beater neck had been bolted, glued, and painted into some monstrosity to look like a neck through. I bought the wasted remains and cleaned it up. I have a slew of 80's parts that I am using. I am fogoing the stock TOM in favor of a vintage Kahler Flyer. I am not sure about the pickups yet. I have the original Jacksons, a set of JC80's w/20db boost out of my Model 5, or a strange set of German Ultrasonics I might use. The tuning keys are cheap allparts circa 1989. After stripping the neck and cleaning it up I lost a mm or so. It went from a 43mm to a 42mm nut. I am refinishing the neck with superglue /clapton style=""/. The hardboard top of the V will get the same Superglue treatment before paint. Wicking the hardboard with Cyanoacrylate makes it hard as a rock. I have used this technique on Basswood and Poplar guitars before finishing them because it is not as heavy as an epoxy or poly.
Linked to picture...
King V
Check out the rest here
http://smithlx.blogspot.com/