C.R.S.Km.D

i was trying to avoid that as i didnt want to cover up to much of hte paint work

any opinions on the scratch guard shape

hey been a while due to the weather down under. but i have made some progress only thing left is to make the input jack cpver plate. i had a circle as is common for the flying V but it looks...bad. so here is a picture of it as is im thinking ill make a trapeziumish parallelagram, parallel to the pickguards edge and then the other two sides following the body. but i am open to suggestions

hey i have tried a few time to get the wiring right with this set up and i just cant do it i have 2 tonerider generator humbuckers 1 shadow kill pot in the volume position a 3 way toggle switch and 1 tone. how should this be wired! thanks in advance CRSKmD

and now for 700 coats of clear top coat

dont you worry it dried in a protected area for 48 hours before i removed the tape haha. i hope it turns out good, playability as well as look

taped black tape removed

the kill switch is part of the pot though. interferes when u press the kill switch the imediatly change pickups they are half on until you hit the kill switch a few times

does any one know how to wire a 1 volume(shadowkillpot as volume) 1 tone 3 way switch with a HH (toneride generator) pickup set? i have done it how i think it should be but the kill switch seams to interfere with the pickup switch

haha i wish i had found that kit but he saga ones body routes are different http://www.sagamusic.com/catalog/details.a...&BrandID=77 i got the body and neck blank from my local guitar shop the resembalence is uncanny to those pictures though

nah it should pretty much look like the mockups i tried the military styled 'arrow chevrons' and it didnt work as well, but the tape is reffered to as chevron tape at my local hardware store. and here as well http://www.landw.co.za/products/view/1 and as i said im going for the electrical harzard tape cheers anyway but i dont think the arrowed chevron will work because the body is already v shaped

un fortunatly i ahve done the block inlays already but it fits well enough andy way have done a bit more its YELLOW now still more coats to do

here is my attept at showing it black and still shinney and to compare the silver i have to say im still liking the silver as my idea behind this project was to look industrial. i think with the chevrons (electrical hazard tape style) and the standard tread plate it forfill this goal better as most work places would not bother to pay more for less visible tred plate. just MHO. but i still want to hear all of yours

haha cheers the t shirt is my design/rip off i printed it at home but yer the head stock is going black thats one thing i am not sure on i can always get it anadised after but if ur handy with photo shop u can colourise it ? yep black it is but pickgaurd probaly will stay as it is

got the undercoating done today by the way i went with a half built neck (truss rod installed, fretboard slotted, blank headstock) and the finished it with the head stock and inlays i wanted mixing paint and thinner (nitro) before painting painting first undercoat done