Jump to content

mack10series

Members
  • Posts

    32
  • Joined

  • Last visited

About mack10series

mack10series's Achievements

Contributor

Contributor (5/14)

  • First Post
  • Collaborator
  • Conversation Starter
  • Week One Done
  • One Month Later

Recent Badges

0

Reputation

  1. as far as the washer, what would be the best thing to do; solder it to the shielding, or screw it to the wall of the cavity
  2. Sorry if this is a reposted question, but if i were to shield the inside of my electronics cavity on my guitar. could i ground all of my wires to it, or would i still have to use the back of a pot, lug, or something else?
  3. for example when i play the intro to the spirit of radio, the high E pulls off the neck, making a high pitched noise... almost like the string is too close to the edge of the fretboard. I am pretty familiar with the setup process, but cant seem to find a really good guide on the total setup on a floyd-equipped guitar..
  4. I want to get my wolfgang to play like it was brand new! The guitar has fret buzz all over, and has a strange pull off problem on the high E string where the string goes off of the neck, and makes a non-pleasant sound. Can anyone help me out, or point me in the right direction?
  5. sorry if this is a stupid request, but can someone show me an actual picture of the toggle switch shown in this schematic http://www.seymourduncan.com/support/schem...ay-w-split.html thanks
  6. question, would it work if say one would put all the ground wires into a wire nut?
  7. I have another question; being that i will only have the 2 push pull pots, how do make one of them a tone pot, and the other one a volume?
  8. i am putting together a dean bolt-on guitar, and in buying the parts i bought what i thought was a generic neck plate & bolt set. When i tried attaching the neck to the body, the bolts would not go in all the way. Do I need different length bolts, do i have to redrill the holes on the neck,or do i have to shim the neck?
  9. OTOH, if you're going to buy the handmade 500s from Bill and Becky Lawrence ( http://www.billlawrence.com/ ), they'll still come with 4-conductor leads - they'll just sound better! ← those are the ones im ordering, thats good to know!
  10. im ordering an l-500xl, and l-500c. Are they four conductor pickups?
  11. I have a 2 humbucker guitar w/3-way switch, and I want to split the coils on both of them. I was browsing through the seymour duncan site and wasnt sure which schematic to use. Does anyone have a schematic on how i would do this?
  12. My explorer got flooded out in the recent hurricane; the neck fell off, i scrapped all the hardware and electronics, but the body is salvageable. I wanted to know how would i go about converting it to a bolt-on. I know there will be routing involved, but does anyone have experience with this type of thing? Any advice on what to do?
×
×
  • Create New...