10pizza

awesome, you definitely know your way around a workshop! Metal or wood don't differ that much I suppose ;-)

great looking body and neck on this one. Looking forward to the end result to give me some inspiration for my next build. carving the horn will solve the problem hopefully. Funny how sometimes your design get's influenced by practicalities like these. It might end up as a signature mark even maybe! ;-) good luck ps. Great radiusing jig.

@2.5itimman that sucks! Good to know so I can be extra careful. very nice body you've made there with the padauk! following your thread now as well, Nice looking neck as well with the maple/walnut combination. I'll reply on your thread so we don't mix things up, but surely an interesting build you've got there.

thanks @Mr Natural. Hadn't expected it to be so prone to splitting! Maybe a different sort of wood as the thick bodypiece will help avoiding that. Not sure yet on what to use though..

Not much time on my hands at the moment to start my second build, but I need to make some design decisions maybe you guys can help me with. I've got a nice piece of Birdsey maple from which I used one piece for my first build. So going to make me another be-maple neck. Also I've got a nice piece of be-maple for a fretboard, so that's all set. Then I've got a black limba matched top which I'd like to use for my next project. Don't have wood for the body yet though, so definitely want to hear your recommendations! for a body design I'm thinking about a Mosrite-ish shape but with sharper horns. Maybe with a strong contour so you see 2 different woods on the top. anybody got some good experience with Black Limba?

awesome work, nice pics of the routing process!

final update: it's in the GoTM contest for January!

First Build: the Swel ZebraCaster Just missed the December 2016 deadline because I had to get some good pictures taken by my wife,, but finally I am able to post here! I initially started with a refinish/customizing project, but ended up building a guitar from scratch with raw wood, which I didn't think was do-able for me yet, so I'm thrilled already to be able to post in this topic! Specs The guitar specs: Tele-style body of Mahogany with 6mm Zebrano top 25 1/2 "" scale 250mm neck radius with assymetric 'thick' D-profile Birdseye maple neck with rosewood fretboard and Swallow-bird inlays Jumbo 6100 frets Zebrano-headstock finish Ibanez Edge floating Trem with top-Lock Dimarzio Paf Joe and Paf-pro humbucking pickups 1 Volume (push pull) for high-pass filter and , 1 Tone (push pull) for single coil switching Gotoh tuners Tung - oil finish I designed/built this guitar for myself. Specs were based partly on my Peavey Wolfgang (neck) and on the specs of an Ibanez Satriani JS10th (electronics, radius). the looks were inspired by Searls' guitars. I used the JS10th specs as I once owned one and really liked the radius of the fretboard and the versatile pickups. The Edge trem I had available and I really love Floyd trems, so that was an easy pick. Finally the birdseye maple neck because I love my Peavey wolfgang neck and because I'm a sucker for birdseye maple, so it will probably end up in every guitar I'm going to build! I was able (fortunately) to use a friend's workshop to do bandsawing and some bandsanding. Most of the work was done in my garage and back-yard however. Tools Some tools I created to get this done: fret press fret-slot duplicating jig simple thickness routing jig templates for body, neck, pickup cavity routing and trem routing Background This guitar is special to me as it proves that with little professional tools but a lot of care and attention basically anybody can build a good guitar. I've had the idea of building a guitar for a long time, but just not felt comfortable doing it and stuck to customizing. In the end it's just a question of doing it! Special thanks to all you guys on ProjectGuitar providing tutorials, tips&tricks and advice. Without this I wouldn't have been able to get this result. I've learned tons of stuff for my next projects. Swel guitars Swel is frisian ( local language ) for Swallow and is the symbol of my town so I used it as a name for my guitar(s) and hence also the inlays. Thanks for reading! link to a short video with crappy guitar playing ;-) link to the build thread:

either way, I'm sure you'll learn a lot! good luck!

thanks guys. nerve wrecking stuff this spraying. Constantly wondering whether you put on enough and scared you put on too much. I put on 7 coats of clearcoat, guess that should be enough to protect it and make it shiny. now, 2 weeks of waiting and then the final touches! Looking forward to that very much!

update on the progress. yesterday: stained the maple top with Keda Dye. first I used yellow/red. after sanding I used brown to get burstlike effect. Sanded again and repeated with yellow/brown and again with yellow. This morning I wasn't quite happy with how the brownburst looked like on the sides so I sanded one more time and then only used yellow. Really happy now with the result: nice gold/yellow color. then today I routed the inlays in the fretboard, including my bil's initials for the 12th fret. Glued them in and started on the finish. First a couple layers of primer, which I had to redo as the body slipped from the coathanger during drying ..... GRRRRR! stupid. glad it didn't fall on the maple top! got some dents in the bottom which needed repair, after which the process of finishing started again. finally the stuff is hanging to dry. Tomorrow I'll be doing the clear coats. Then it can cure for 2 weeks and that will leave me a week to finish it off......

yeah. And today in the sunlight I spotted 2 imperfections still, so not done yet! Found time for some hole drilling at my Dad's workshop. Forgot to bring my forstner bit to drill the pickup-switch cavity, so a revisit needed. a question: I'll be putting on a decal on the headstock, and the headstock will be finisched with a clear coat. Any special preparation needed on the decal or just put it on and cover it with the clearcoats? thx

very nice! love the shape and the wood combinations. What pickups do you use on these?

December 6th is just a few weeks away, so time for some action. Today I sanded the body , sanded again, sanded some more and finally I sanded it. In the next few days I'lll be drilling the potholes, pickupswitch hole and output jackhole. Then the goal is to do the keda dye of the top on monday, Then on Tuesday it's time to do the back and neck in black and then the lacquer on top of it all. Then it'll have two weeks to cure and I have a few days left to finish this project off in time for my brother in laws birthday bash on December 10th. man, this is going to be tight! But nothing better than a firm deadline to get things done! that New York Mets bottle came in handy to sand the cutaway ;-) Didn't take it with me from NY for no reason in 2006 then

so.... I thought I posted a reply with a picture of my binding routing jig that I've made for my Dremel tool, But It's not here so I must have forgotten to actually submit or something. Anyway, I routed the binding and learned that next time I will definitely find another way to do it! grrrrr. This is surely not the best binding done, but hey, it was meant as a learning experience anyway right? the router bit slipped in the Dremel, causing a deeper cut than planned over an area of 3-4 cm so some repair had to be done. I've now got the binding installed and initial sanding is done. Some more patching and then it's off to even more sanding.

awesome build! really unique and beautiful instrumet. How does it sound and play? congrats

here's some info on RG170 models. The site also has info on models from other production years: http://ibanez.wikia.com/wiki/RG170_(1997–2002)

good luck @strawtarget and above all: have fun!

thanks @Muzz got my parts in yesterday, so that'll help preparing the body for final finishing. Always like to be sure on the hole-sizes I actually need before I drill... I'll be doing a spraycan finish on this one. Found a nice tutorial by @Tundra_Man which looks like a solid guide. http://tundraman.com/Guitars/Finish/index.php

thanks. After inspecting in daylight I found some imperfections and spots that aren't equally carved on both sides, so some more sanding to do before moving on to the next fun bit! main challenge now is to get a proper binding router bit setup. I don't want to invest too much in it because not sure if I'll be doing it much. trying to think of a creative way to use my plunge router.....

awesome, love the pink color on that one!

experimenting makes the best ideas! nice read, looking forward to read on your progress

good luck with this build, Looks very challenging as a 2nd guitar!

hey all still finishing up my Zebra caster which will be done in November, but started on a learning project in the mean time as well. a few years back my brother in law brought me a bag of guitar parts to see if I could make some out of it. It's been lying around the garage for a long time, but I figured I might as well use it as a practice object. it's an LP copy that was worked on already by someone, doing some repainting and creating some contours in the body. Didn't like it so I routed a piece of the top of the body to put on a flamemaple top. after putting on the top and filling several holes in the body I routed the neck cavity and fitted the neck. Also drilled the bridge posts and did a quick test with a string to see the action and setup possibilities. This basically sucked so I routed an angle in the neck pocket to enable better setup. This led to a slip, so I needed to glue in a small piece of maple and resand the neck pocket to shape. today I routed and sanded the carve top, one of my learning topics. Very timeconsuming, but got some help ;-) and really nice to see the body come alive! the plan is to give it back to my brother in law on his birthday which is December 6th, so trying to keep the momentum going on this one. some pictures below of the process so far. the bodywood isn't very nice so I'm going to paint it black. the top will be done in a yellow/brown burst with Keda Dye to pop out the flame maple. next item of practice: routing and gluing a binding.

+1 great job, would love to draw a nice finish, but got no talent. nice project!