possum1284

the mahogany is a great deal i agree i was referring to the hardware on the site being overpriced. Adam

even with the discount your price seem a little high compared to warmoth or lmii. Adam

im horrible at wood working i have designed seversal pretty cool looking guitars though in photo shop and autocad. Everyone laughs the sharpie worked fine at looks fine, it was cheap and involved little work. as long as its not hazardous im fine with it. it never hurts to try something new. Adam

the sharpie cover fine looks like paint actually, my question is will it interact with the org finish and become hazardous Adam

Hi Would anyone in the ny area be interested in working with me to produce a few of my designs? thanks, Adam

hi i have a guitar neck that was finished by warmoth unfortunately the headstock colloor is a hideous orange. is it safe to paint over it( will it damage the orginal finish or interact with it at all and become harfmful?) i was thinking of using a permanent black sharpy marker would this be ok thanks, Adam

hi thanks all. the guitar is actually mostly wired i just have to connect the ground wire and out wires both of which we cut so im actuall just putting the wires back together. So the tone/ sound wont suffer using the caps for those wires? thanks, Adam

I recently had eye surgery so im trying to avoid soldering,i was was woldering if i could just twist the wires together and use the caps electricians use, since all im doing really is cconnecting 2 wires together which were cut, Would this hurt the tone at all? here is a picture of the caps im talking about. thanks, Adam

hi i have a martshal mg100dfx combo amp, which sucks, the electrics are shady, the speaker works fine though and is detachanble like a guitar cable. My question is could i buy an amp head and use the marshal cabinent with it, just the speaker the electronics were removed? thanks, Adam

hi want to wire 2 humbuckers to a 3 way blade switch with just a volume pot. i found the diagram pictured below, inorder to do what i wanaa do would i just eliminate the tone pot in the diagram? basically do i just wire the pickups to the switch like in the diagram and then just use a standard volume pot wiring? thanks, Adam

hi i have a les paul dounle cut body with a 25.5 scale, the bridge pickup cavity is already routed in the correct position. My question is if i wanted to add a neck position pickup cavity how far should the the 2 cavities be spaced apart? thanks, Adam

i really want to see a finished product of this body.....

all the connections are on the bottom lugs correct with the 4 pole 5 way switch? thanks, Adam

thanks i really appreciate it. the switch is a 5 way 4 pole correct? Adam

60 would be ideal if some one could draw that into something i can read, like rubber314 did. thanks, Adam

what wont work? thanks, Adam

Additionaly what would the switch positions be , what pickups would be active at each position? thanks, Adam

i can only find a 5way 4 pole switch would the wiring be the same? thanks, Adam

hi i want to hook an hsh pickup confifuration that was orginally hooked up to a 5 way blade switch to a 5 way rotary swith. here is the orginal diagram with the blade switch. How do I hook that up to a 5 way rotary switch? Also do i want a 2 pole or 4 pole rotary switch? I have never wired a rotaRY SWITCH BEFORE SO I HAVE NO IDEA WHAT THE VARIOUS LUGS ARE FOR. thanks, Adam

hi im selling the following neck: im accepting any resonable over over $200 pictures of the neck Warmoth Custom “Pro 13 Degree” mahogany neck Double expanding truss rod AMAZING figured Brazilian Rosewood fingerboard (I talked the Warmoth folks into pulling out a piece from their special secret stock--no lie!--for an extra $65). 25 1/2” scale, 22 frets, 1-11/16” nut width, fatter “Boatneck” back contour for enhanced comfort and playability Nickel/Silver medium-jumbo fretwire (fret slots are cut, but fretwire is not installed) Beautiful Quilt Maple Headstock Overlay...finish it like the body or just put a clear coat on it--it complements the body nicely! the neck is unfinished,and no position markers drilled (curly maple dot markers included if you want to add them). The headstock and back of the neck will need some sort of a finish (see Guitar ReRanch for easy D-I-Y finishing!) Needs a nut (only part missing, but not it's not too difficult or expensive to have a luthier cut and install one for you!) (note: Warmoth ships custom necks with a slight bow since there is no string tension...the neck will be straight as an arrow once you adjust the truss rod, put strings on, and set the guitar up. Also, the neck pocket is angled, so the neck attaches with 2 pairs of different length screws...make sure you use the proper screws or you'll drill through the fingerboard!). please contact me if you have any questions or are interested in the neck

hi here a link to the auctions im accepting any reasonable offer thanks, Adam Mahogany double cut project Above item includes a set of humbucker pickups as well Schaller golden 50 Above item includes mounting ring as well

For Auction a terrific Prs Style project. i dont have the time to finish. the auction includes the following items: feel fre to ask question. All items are available to purchase seperate so feel free to make an offer. PRS Project link Thanks, Adam 1.Maple top shaped lika Prs 2. Mahogany prs shaped body 3. Mahogany neck material 4 Rosewood Frettboard material 5.Prs Style wrap around bridge with inserts 6.Set of zebra Humbuckers ( not sure of the brand) 7.Set of Humbucker mounting rings 8.Push Pull pot 9. 3 way switch 10. Set of 2 genuine sealed PRS knobs 11. Genuine sealed PRS volume pot - 500k 12. Wooden trussrod cover 13. Chrome footbal jack plate with jack 14.Set of 2 strap pegs 15. Body routing template 16. Neck and fretboard routing template 17.Control cavity routing templates 18. Humbucker cavity routing template 19. Various lengths of wire 20. Prs wiring Diagram

Does anyone know thw answer to my question? Adam

hi have fender neck that was finished in polyurethane. the finish was a little rough on the back of the neck so i used a really high grit sandpaper to smooth it out. i did not san through to the wood. i was just wondering is the polyurethane safe to touch as a result of sanding it? i know the dust is bad for ya so I was just wondering iff the neck is ok health wise. thanks, adam

whats so bad about a bolt on neck ? i actually preffer them. ive owned a few epiphones there made pretty well. also why dont u give ibanez or carvin a shot. i guess if u wanna build one look on ebay or try usacg.com or warmoth but they may be out of your price range. Adam