sprack
-
Posts
9 -
Joined
-
Last visited
Content Type
Profiles
News and Information
Tutorials
Product Reviews
Supplier Listings
Articles
Guitar Of The Month
Links and Resources
Forums
Gallery
Downloads
Everything posted by sprack
-
Definitely still a WIP and I don't have a real one to take measurements against so this is strictly pieced together from the installer pdf. If anyone has more info on the saddle dimensions please let me know. I don't have access to post to Uploads, otherwise I'd have posted it there. Evertune_FT6_v4.dxf
-
want to get feet wet... looking for recommendations
sprack replied to mistermikev's topic in CNC Chat
You can do it in the vicinity of $1.5k. I'm just in just a little over $2000 USD in the hole with a Shapeoko XXL + accessories. CAD/CAM in Fusion360. Remote controlling it via a raspi 3+ with CNCJS, which I found much easier than LinuxCNC.
-
I'm still hitting invalid certs on this. There's a howto on hosting the cert on the ELB since it looks like you're offloading through one - https://blog.alejandrocelaya.com/2016/08/16/setup-a-lets-encrypt-certificate-in-a-aws-elastic-load-balancer/ Also, all links point to the http page rather than being relative and allowing https to be ubiquitous when signed in through.
-
Are you building a dust shroud for this or do you have good enough collection on the boot to not need it? I just got mine setup and I'm wondering if it's worth building.
-
I noticed the cert for the site isn't valid for the domain. It's just using a wildcard from the provider. LetsEncrypt offers free certs if you want to create a valid one for the site without the normal CA cert costs.
-
With the Fusion splines I've had the best luck using too many points initially to get the boundaries right and then subtracting and adjusting them to match the curve properly.
-
Poked my head inside. Right you are. It is 3/4", but its MDF. Which is why it feels like a ton of bricks.
-
I'll pop the back plate tonite and check. You're probably right. It's an old warhead cab for '87 that came with my RG100ES.
-
It is too heavy to haul. I weighed it a couple years back at 143lb with the 4 T75's loaded. Sorry for the washout on the tape measure. Really? You sure its not the edge treatment that makes it look like its 1-1/2 all around. At 1-1/2", that 4x12 would be way too heavey to haul around to gigs.
-
My Randall 4x12 is 1 1/2in thick. Has to be doubled 3/4ply.
-
Clear Coat Options For Over A Sharpie
sprack replied to jlarremore's topic in Inlays and Finishing Chat
This being my first post to this board you can take what I say with a grain of salt. I just watched some of the Dan Erlewine videos and he mentioned using a clear epoxy over a signature. Buddy Guy if I remember correctly. If I'm wrong feel free to chastise ruthlessly.
