NAWY2J

Tahnk you every one and yes i have read the book and it is just confusing me even more but thanks for how to ground and all that and i will post pics when im building churz

Just curious....how long ago did you find out about this assignment? Good Luck Steve (the post above was added to for emphasis) november but 'cause we in school we got to do all these research and all taht wich took up loads of time

Did u make those you'r self?

ye i know i have tried looking for stuff already e.g trying to find the bridge postion but nothing came up and also i looked for how to earth the wire ?

Thank you all very helpfull

ok thank you also one thing how do you determine the bridge and tail piece position??

ok thank you

ok cool do you have a diagram or a picture of you'r guitar and you putting the wire in ??

Ye that is the joint where do you get the template from ?? and also how deep do tou rout same for teh ickups how deep?? also with the laquer do you have to have a special mask?

ok churz but how do i shove the cable in there and the pin ?

What about a tune o matic ?

Thank yo all just one question how to do make the cable going from the bridge to ground it ???

What your planning is only vaguely possible in the time ... but it's going to take a lot of focus and a decent amount of research. Click on the link below and visit the best amateur (and professional) guitar building site on the net ... it has a stack of easy to read information and tutorials that will take you through all the steps you need ... and the search function is good. Very useful guitar building site After you've done that you'll be in a much better position to ask some good questions ... which the folks on this site will be happy to help with. Thank you for teh help i will search the site for help fro now on thank you very much

Thank you very uch for helping me . could ijust ask how did u cut the neck join and how do you determine the join ??

Thank you all for the comments i know it is short but im only doing a body cose im a newbie so i have bought the neck so taht saves a bit of time , also i dont have to treat the guitar in that 30 days and i can go in to do DT in free lessons so i get about 3 free lessons a day so if i could have some tips on how to router the cavities and the humbuckers nd the bolt on join i should be gfine i think ??