Jump to content

Blackened_led

Members
  • Posts

    5
  • Joined

  • Last visited

About Blackened_led

Blackened_led's Achievements

Newbie

Newbie (1/14)

  • First Post
  • Conversation Starter
  • Week One Done
  • One Month Later
  • One Year In

Recent Badges

0

Reputation

  1. Damn! you are right!!! I googled it and saw a thousand times the picture, but never searched with "thin" or "thick" Nothing more to say ... the cables are joined backwards like Samba said before ... I'll invert the cables. And then, try to resolve the "no sound" problem I mentioned ... I don't know why the pickups don't have a diagram (EMG ie. do have) Thanks a lot to all of you!
  2. This is a more accurate picture showing the cables. Notice that the thin cable is slightly blue, in my case, its completely black like the other ...
  3. Yes, the bridge is grounded. The sound is like a high frequency white noise, specialy using distortion
  4. Thanks for the answer Well, there is a point right there. Because the hot and the ground cables from the pickups are the same color!! the only difference is the gauge... First, I used the thinest cables to the volume pot ground, but no sound came out. Then I inverted the cables and used the thickest ones, and then, started the sound, but with this problem... Maybe the cables should be at the first position and the sound problem is another ... I should post a photo of them ... Wich of the cables should be the hot? the thinest or the thickest?
  5. Hello everyone, I have a couple of Wilkinson WVC N like this ones I installed them on a explorer that I built. The problem is that when I touch the mics with my fingers, they make an ugly noise ... sounds like a grounding problem, but I don't know why, because I grounded them with the volume pot (and with the jack of course) ... Any idea? Thanks!!
×
×
  • Create New...