Jump to content
Entry in the April 2024 Guitar of the Month contest is now open ×

tjiscooler

Established Member
 View Profile  See their activity

  • Posts

    75

  • Joined

  • Last visited

 Content Type 

Everything posted by tjiscooler

  1. tjiscooler
    as gorgeous as the final product is, I kinda liked the way it looked all gouged up, especially the heel carve, looked like an awesome texture. id like to do that to whole guitar someday. Also, that wedge taper you have is really cool looks comfortable with the weight in all the right spots!
  2. tjiscooler
    I love this! HOw did you size the fingerboard to the neck? looked like you glued the full blank onto the neck, but a router wouldn't make it past the body?
  3. tjiscooler
  4. tjiscooler
    Hey guys, im trying to fix this guitar, the bridge is shifted about 1/4" too far back on bass side and about 1/8" too far back on the treble side to intonate properly. Does anyone know of any replacement bridges i can swap this with to get more travel? Ive seen some wide ones before, maybe a wrap around or something. ideally i would find something compatible so i dont have to redrill and start over here. Bridge is I believe a Gotoh TOM, the studs are about 1/4" and are 2-7/8" apart center to center E-E spacing is 2-1/32". bridge is 9/16" wide.
  5. tjiscooler
    When you use them, are they supposed to touch? If they are mounted touching I wont have to ground each one individually right? Should i stick a business card between them all when I mount them to keep a small gap between them? My first time multiscalling so Im a fraid some of this is pretty new to me and cant find much info about it,
  6. tjiscooler
    Ok I made a printout, Its totally the Green line. Thanks for the help Ripthorn
  7. tjiscooler
    So its the Green line then? Im super excited to start planning this out. I still have two others for customers but this ones for ME!
  8. tjiscooler
    Also, forgive the awful crooked lines, my pen died partway through and I had to grab another to do the bridge portion haha
  9. tjiscooler
    Hey all, Im planning my first multiscale build and im having a few issues on fretfind regarding the nut and bridge width fields. The info tab mentioned a line "perpencicular to the centerline" but It also says "along the nut" so im confused. I made a crude drawing to illistrate, basically do I use red, blue or green as the measurement that goes into the "width" field?
  10. tjiscooler
    Damn! im in the same exact boat! I bought the stewmac pearl and have a 12 inch board for it. Thanks for the tips guys.
  11. tjiscooler
    Thanks for the tip! Ill look around for some of that. I wasnt keep on the oil either but the tape sounds nice and clean!
  12. tjiscooler
    Hey everyone! I thought id share my new favorite tool. I originally made this out of aluminum, but I didnt feel it was sturdy enough. I went all out and used some angle iron, and i welded it together instead of bolting like The last version. I feel like it came out fairly well. The bolts on the corners allow for angles as well as vertical adj usability. Ill spend the next few days sanding it smooth and giving it a polish on the contacts points. A little oil and it will flow like butter on a hot pan! This was my first time welding, but I think its pretty serviceable! The tall gentleman in the pictures was kind enough to lend me his welder for the night. Thanks for checking it out, cant wait to break it in.
  13. tjiscooler
    Oh yes I know it sound totally ludicrous! I used just one thin spit coat of shellac then just a few coats of oil. The wood was pretty far from sealed after the shelac. Doing it allowed me to only apply two or three coats of oil and have a very smooth feel but still have the pores somewhat filled. Mostly it was just an experiment out of curiosity. Ive been playing the neck for a year and its held up just fine. I Dont think ill do it again though. I see now what you mean with the neck pickup route. Came out great, Carves coming along nice too!
  14. tjiscooler
    That guy did a kahler one too
  15. tjiscooler
    Teak oil and wax is my favorite! I once put a very thinned out coat of shellac on first, then teak oiled a few coats and i ended up with a "inbetween" kind of finish that feels great. Hows the build goin? Im curious to see how you hog out the neck pickup area.
  16. tjiscooler
    I guess I was over thinking it! Thanks for the help, seems so simple now haha
  17. tjiscooler
    SO close!! Great looking build, i really like the blacked out look.
  18. tjiscooler
    Im making a guitar soon thats neck through and has a nice walnut top to go on top. My question is, how do i fit the top wood around the fretboard area? An example would be this http://projectguitar.ibforums.com/index.php?showtopic=45827&st=0 (great job by the way!) I was thinking of tracing the fretboard and maybe making a template for the router. If you would so kindly share your method or lend some tips id be a happy boy!
  19. tjiscooler
    I did this by hand with a round file and it came out pretty well, unfortunately you can see part of the trussrod under the nut. I think using a drill bt its the way to go to avoid that.
  20. tjiscooler
    YES! Thank you so much, I really appreciate all the help.
  21. tjiscooler
    Hey, im lookin for some better bits for the dremel because id like to learn simple inlay and I need decent bits that wont break all the time (theyre so tiny!), any tips?
  22. tjiscooler
    I wanted to see what the particular polish you used was again, I found an auto part store that might have it stocked. I like to buy locally whenever possible. No biggie crashes happen, I thought I screwed something up and got banned or something haha Thanks
  23. tjiscooler
    Where did the rest of the thread go?! I wanted to go over the info again and it was gone
  24. tjiscooler
    Wow, thats a nice looking router! Wood knobs and everything. I like the dual base thing too. My old router had triggers on it, it turned off when you let go. How do you like the on off button?
  25. tjiscooler
    Hey everyone! WEll I need a new router, specifically for guitar work. Can anyone recommend me a solid, tough and user friendly model? It needs to support up to 1/2 inch bits and have the power to not get bogged down with it. It doesnt have to plunge but It would be nice. Ill be using it to thickness plane bodies in my planing jig and probably use it with templates to route bodies and pickup/rear cavities and the like. Budget is a flexible 300-400 Any help is appreciated!
×
×
  • Create New...