Jump to content

sonrisavertical

Members
  • Posts

    4
  • Joined

  • Last visited

About sonrisavertical

sonrisavertical's Achievements

Rookie

Rookie (2/14)

  • First Post
  • Conversation Starter
  • Week One Done
  • One Month Later
  • One Year In

Recent Badges

0

Reputation

  1. I hope someone out there can help out. I have a Marshall JCM 900 100 Watts Head that I use with a 4x12 cab. I also have a very old Roland Jazz Chorus-120 that has been with me for ever. I am trying to find out how feed the Jazz from the Marshall so that I could use the Marshall distortion and Reverb on the Jazz. Can it be done? I want to use both amp at the same time but do not want to use an A/B switch nor a two-out pedal because I want the Marshall distortion and reverb in both amps. Thank you for the help. Robert
  2. Hi Guys, I got a Strat style body from Ebay for my first project and after I got it I noticed its thinner than my 1996 Fender American Standard strat and my 1982 Kramer Pacer body. Its about a quarter of an inch (maybe a bit more) thinner. You can tell because the tremolo bridge goes all the way thorugh the body and cannot place the back cover. It is obviously a cheap immitation body but it got me wondering if Fender bodies vary in width depending on year made, or plant, or quality. Can anybody bring some light to this question? Thanks Robert Justiniano www.sonrisavertical.com
  3. Question??? Fellow guitar lovers! I just order this bridge to install in a Strat copy body that originally had a six screws regular tremolo bridge. I need to know the proper drill bit I will need and the best way to do it with a hand held drill. I don't think I can get my hands in a press drill to do it (and even if I could, I wouldn't know how to use it). I would really appreciate your help. Thanks in advance to all Robert Justiniano
  4. Dear All, This is simply an awesome site! I need your expert opinion on the following: Doing my first project. A Strat (How original, ah?) I have the body already, I need a neck. I have two guitars with necks I really like and I am basically hoping I can find a neck as close to any of these two: 1) 1996 American Standard Maple fretboard 2) 1982 Kramer Pacer series neck (original logo) Maple fretboard. The catch: Before I spend on an original Fender neck, do any of the necks out there by some of the companies like Warmoth, StewMac, Mighty Mite, AllParts, and so on measure up in the overall feeling and functionality from the necks I just mentioned? Would you guys recommend one over the other? Or are they all pretty much the same? Thank you for the help! Robert Justiniano www.sonrisaverticalmusic.com
×
×
  • Create New...