mefgames

Say Hello to Burl. Clear Nitro on an Ash body with a Redwood Burl top, Maple neck with a 25 1/2 scale Rosewood Fingerboard with ebony fret markers. Seymour Duncan Trembucker bridge and SH-2 Jazz neck. Push/pull pots with 3 way mini switch. Sperzel Locking tuners and a Schaller Non-Trem Bridge.

Meet Kalvin Grain filled Ash body with blue green stain and clear Nitro 25.5" scale Maple Neck with 12" radius Rosewood Fingerboard Steinberger R Trem DiMarzio 103 Neck, 223 Bridge, and True Velvet Middle 5 way switch

TimberMate

I've had good luck with Truoil so far…...

+ 1 on the wheels !

never have liked them !!

Phantom Mando V This is my third build. I wanted to build a Vox Phantom, and my brother wanted a 5 string Mandolin, so this is the result……... Specs, Parchment nitrocellulose finish on a beech body w/b/w tortoise pick guard Maple neck with 2 way truss rod Rosewood fingerboard with maple position markers 19 frets DiMarzio dual coil D188 bridge pick up and DiMarzio D186 dual coil neck pick up Three position switch for neck/both/bridge positions and split coil n/b/b option through push pull volume pot Copper shielded cavity Separate (Single) chrome volume and tone controls Chrome Moongazer bridge Grover enclosed mini tuners String through body ferrules Bone Nut 1 3/8" width 1 3/4" string spacing at the bridge Dimensions: 26 1/2" long x 7" more images at http://s634.photobucket.com/albums/uu66/mefgames/Phantom%20Mando%20V/?start=all

I have a wiring problem I need a solution for and I'm hoping someone can help. I am building an electric Mandolin that I have already purchased a DIMarzio DP 188 and DP 186 for. The problem is I am unsure of how to wire this up the way the owner would like. I am building it for my brother who has some specific ideas of what he wants. I have searched your wiring diagrams, but cannot find one that matches my parts. The 3 way toggle I would like to use for Neck, Neck and Bridge, Bridge selection. The push/pull, I would like to use for a coil tap function for at least one of the pickups. The diagrams I have found show toggle switches, but they don't have 6 lugs like the one I show. I am no wiring guru, so I really need a "paint by numbers" kind of diagram. The entire control section is 1 Push/Pull Vol, 1 Tone, and the three way with 6 lugs. Thanks, Mike

Lemon VI Alder Body Maple Neck Rosewood Fingerboard w/Maple Dots Jaguar Tremolo and Bridge Fender AM STD electronics Kluson Tuners 30.5 inch scale Strings 24-84 Nitro finish This is my 2nd build

I googled fretboard removal for a project neck I bought , and your site came up. I read through your entire tutorial, and it worked like a charm. Thanks for the info. I just registered and will be reading this forum from now on. Thanks, Mike