Thanks for replying,
I know how to wire the stuff after I get into the pickup, I just dont know what to do inside the pickup. Im doing it to a gibson '57 if that helps. I dont know what wires to change once I take off the pickup cover.
For the tone slider, this is what I am trying to do:
I want to rewire the strat like this:
Push pull pot for bridge pickup ---Volume, selects deselects pickup(pull to select)
Push pull pot for middle pickup ---Volume, selects deselects pickup(pull to select)
Push pull pot for neck pickup---Volume, selects deselects pickup(pull to select)
Basically you will be able to control the volume and turn the pickups on and off individually. Then though I have no tone control because I will have used the hole where the tone pot usually is. Instead of having a nonfunctional slot where the pickup selector usually goes, I want to have a slider that controls the tone.
So if you put the old pickup selector in position one, it will set the tone to 10
Put it in position two it will set the tone to 8
And so on....
Understand a little better now?
Thanks again.