Jump to content

Brisbane Tom

New Member
  • Posts

    1
  • Joined

  • Last visited

Everything posted by Brisbane Tom

  1. Hi everyone - a while back I decided I'd like to try my hand at building my own guitar and eventually stumbled across this forum. I basically have no background at all in woodworking so I've found this to be a really helpful resource just based on the sheer number of skilled luthiers posting here. I decided to build a guitar modeled around the Les Paul, however a simplified version. The body of the guitar is made from one large block of makore wood (not glued together). As I said, I had no real knowledge of how to build a guitar so a lot of this was improvisation. Specs: Body: Makore Hardwood Neck: 22 fret - no idea what woods as I just purchased a neck off ebay. Pickups: generic, low cost Electronics were from the Stewmac Les Paul wiring kit. Bridge: Tune-o-matic I'll probably post some more pictures as I make further progress and am open for all criticism / advice. My most recent of many errors was that when I was hammering in the bridge bushings one of them went in slightly slanted and now the bridge doesn't fit - I have to remove the slanted bushing. Also I realise the bad placement of the switch - just another lesson learned. Full disclosure - among other things, I also originally routed the electronics cavity on the wrong side at the back - I'm thinking of putting a little door on this hole and making it a spot to put picks etc.
×
×
  • Create New...