Jump to content

hooglebug

Veteran Member
  • Posts

    669
  • Joined

  • Last visited

  • Days Won

    4

Everything posted by hooglebug

  1. well its taken far too long and it doesn't look like I imagined it looking (every time I see a nice pink/purple evening sky i'm annoyed) but I still like it and at least its done. and sounds really nice. even before you plug it in. the pickup is an old bare knuckle p90 (dont ask which, I cant remember). tuners are graphtech ratio (with buttons I made because I love that shape) which are really nice tuners. bridge is also graphtech with a ghost system. anyway, heres some pics you can see some remnants of the pink that would NOT come out right at the bottom you can barely make it out but there are the Japanese characters 'sakura' on the 12th fret (cherry blossom if you didn't know) which was the most fiddly bit of inlay to cut by the way, the top and back are from the same plank of wood - it cost £25. not bad for that price!
  2. i'm really tempted to just smash the stupid thing. its doing my head in. this will be the 7th time (I think) I've sprayed the top. I cannot get it to look even remotely like the back. I might have to just strip the whole thing and start again. or smash it. either way i'll pissed off
  3. well you'll have to wait because I STILL haven't got the top to look like the back yet and its doing my head in. I've just sanded it back to wood for the 5th time. I THINK I've got it cracked now though. I had for some reason assumed i'd used a powdered dye for one of the layers, but now I think I must have used a liquid one. we'll see I guess. also, I think I've gone off the idea of painting pink behind the flowers. i'll have to try and see
  4. well I've been trying different colour thingies for a while and finally thought I had a good plan. so today I excitedly started spraying... and the back looks pretty good. I think I'm gonna keep going on the back. but the front. oh dear. so that's coming off tomorrow and i'll try to get it looking more like the back. by the way, the pink I got is bubblegum pink, which sounds horrendous, but under the blue (with a few highlights on top of it) I think it works
  5. yeah its clearly going to happen isn't it. before I've finished sanding everything (because I hate sanding) im trying out some colour ideas on the back. so far I have it in my mind that im going to stain blue and fade it out towards the bottom third, then in that clear bottom third do pink, sanded back, then the whole thing will have a light blue almost wash over it, so the blue gets deeper and the pink goes a touch purply, so its like those pinky purply clouds you get on an evening. then maybe a slightly darker blue burst that fades away again. and finally some pink painted on behind the flowers (not like Barbie pink or anything, calm down)
  6. I just did that piece as a test to see if I liked it or not. its just burnt on with my soldering iron so its easily sanded off if I didn't like it. but I do. and I think it'll help the flowers stand out more once the colour is on as well. i'll just have to wait till I've done all the sanding before I do it otherwise i'll be doing it over and over again
  7. poll time do I add shade/add small branches, or leave it as it is.
  8. so good news...no, wait, the opposite of good. you know, the other thing. it seems heat makes my wrist worse. and we're currently in the middle of the most ridiculously terrible hot weather. so for the last week or so I have been able to do precisely bollock all
  9. thanks for that, a bit late for these ones as the hole is already too big and they're going to be push on ones, but a good reference for another time I just couldn't leave it blank now could I?
  10. the Dremel was clamped vertically in a bench, I put a dowel in the hole of the knob and just did it freehand. kept looking at an existing knob I had and got as close as I could
  11. in between world cup games (my wrists been so bad I've watched every single match, even the crap ones!) I did the other two. one of them needs a tiny bit more shaping on one side but its just sanding them now
  12. I tried to drill the centre hole, or rather expand the centre hole that was already there from gluing them up (I used a toothpick to hold them in place), but for whatever reason it drilled off centre, so I had to Dremel it instead. I pushed a dowel in there to give me something to hold onto, clamped the Dremel with a little sanding drum in a bench, and started shaping. so heres the first one roughly shaped.
  13. well, I just glued some veneer to some ebony, cut a little slot in the veneer and glued a sliver of ebony binding into the slot for a marker, then cut some smaller circles and glued them on top and cut the knobs out so they look like liquorice allsorts. tomorrow i'll see if I can make a nice hole in the center to put the bits I've cut from some other knobs in so I can get them onto pots, and then at some point if my wrist can stand it i'll just try shaping them with a Dremel like I did the tuner buttons
  14. thanks! i'd love to see that, i'm very jealous. as for my wrist, I've had everything done that they're willing to do. im pretty much just stuck doing very little and wearing a brave whenever I do do something and hope it clears up. that would be the plan, only my drill press is broken, and im going for the bell type, rather than just a barrel shape, so it looks like i'm Dremel-ing away
  15. my wrists still not right, but I just found some offcuts from ebony fretboards and theres enough (if I have a sliver of maple between them) to make three knobs. now I dont have a lathe, so it might be a bit trickier than it should be, but i'll give it a go. the only thing is, I want them to be push fit ones, so i'll have to find some old push fit knobs and cut the middle bits out and glue them in. unless anyone has another thought?
  16. well, a couple of months ago I woke up and my wrist was a bit sore for no reason. then over the next week or so it got steadily worse and worse until it hurt when I did any work. so I went to the doctor and its a tendon thing, so I got anti inflammatories, which did nothing. so I went back and got cortisone injections. that was two weeks ago, and again, it did nothing. then this morning, I was woken up by a massive gust of wind and in my half asleep state for some reason thought i'd felt the whole house leaning over, so went to look out of the window, and in doing so put my entire weight on my bad wrist. and now I cant do anything. I couldn't even hold a toothbrush or wash myself in the shower with it. I was going to have some lettuce in my sandwich, but I couldn't, because I couldn't hold a knife and put enough pressure on it to cut LETTUCE without being in agony. so it looks like tools are downed for the foreseeable future
  17. i just tried really hard not to let go! plus my nails seem to grow rather quickly so I always had a bit of something to pinch onto them with. I dont know how many I dropped (a lot!), but I only lost a few I could manage to cut about 40 before I started going a bit blurry. I limited myself so I didn't go blind!
  18. its been an awful long time since I was on here and I have no idea why! for the last six months I've been working on this guitar. most of which was taken up by cutting out the tiny flowers - all 1300+ of them! I did this kind of thing before on an old shape and wanted to try it again, but make it better this time. today I carved the neck and all that's left is sanding and finishing pretty much. so anyway, some pictures. the front is carved (obviously) and the back is slightly curved from side to side - here with the branches on the top and laid out on the back heres the headstock mid binding - the branches go through the inner black and white - and then with the first bits of shell inlayed. and then headstock done this was the trickiest bit of the inlay - those pieces are tiny this is the back shoulder I didn't want to use any plastic parts (apart from the binding) so I tried to make a p90 cover out of maple - the holes ripped apart, so used a bit of ebano I got for the scratchplate on top instead, and im glad I did. I carried on the inly on the cover and plate graphtech got in touch with me (out of nowhere) and asked if I wanted a builders account, which was nice. so instead of the usual gotoh stuff, this one will have graphtech. and because of the builders account I thought hell why not, so its got a ghost bridge with acoustiphonic circuit too. here are the ratio tuners with the ugly (sorry) buttons. I've been so used to the gotoh 510's which are just sexy, so I got some wooden buttons and shaped them - you can see a botched attempt before I realised I could just print so outlines and stick them on instead of trying to draw around the buttons I had. like an idiot. and the ebony fits in really nicely with the p90 cover and plate - and jackplate/battery cover/circuit board holder. then I made some of those little clamps and got sticking it all together and here we are up to date. and in case you're wondering if you have to be a giant to pick it up - its hollow. I should probably have mentioned that bit. oh, and its about 60mm thick on the edge. the controls will be vol and tone for the p90, then a vol/push/pull for the ghost and a mini switch and here you can see that the inly from the front carries over onto the side and round onto the neck/heel. the sides and neck will be a dark colour so the branches will stand out more. as for the colour of all the sycamore - im thinking a sky blue from the top down, fading out towards the bottom with maybe some pink/purple in there too. I kinda want that look of those pinky purply clouds you get on an evening. I dont know. we'll see. oh, and for some reason theres no picture of the fretboard. but the inly from the headstock carries down onto it, and the inly on the body starts on the fretboard, and the markers are larger falling petals
  19. thanks! they both have a lovely bluesy growly sound to them
  20. well here's the jnr+. i really like this one!
  21. haha not really no. that chrome thing i was doing just would not work at all. and i could find no reason for it either. nor could the people who make (or sell) the product. i did everything by the book, using only the products recommended, and it just would not work. there would be patches where it would look good then the rest was awful and there was no reason for it. luckily, i had explained before hand that i had never done it before and made no guarantees it would work, and while annoyed, as i was, he accepted it so that was ok. but yeah. super annoying.
  22. haha. i let things get on top of me a bit, but now things are rolling again i should be around more. if i remember to post stuff! im terrible at remember what i've posted where
  23. well its been far too long. other things have got in the way, but finally one of them is done. the jnr + developed a problem with the finish on the top (dont ask me, it started cracking and wouldnt stop), so thats been resprayed as we speak, and is already spoken for. but at least i've had time to get this one finished!
×
×
  • Create New...