Jump to content

sparky1

Members
  • Posts

    5
  • Joined

  • Last visited

About sparky1

sparky1's Achievements

Newbie

Newbie (1/14)

  • First Post
  • Conversation Starter
  • Week One Done
  • One Month Later
  • One Year In

Recent Badges

0

Reputation

  1. Its an epoxy i beleave but im not gonna chance it the hard wood dowl will do fine the whole process took about 15 mins to drill with 3/8s and glue dowling in today ill clean up the over hang and refit the neck to this body probly another hour its worth the peace of mind.
  2. drill and dowl it is. thanks again
  3. thanks gripper thats about what i figured, just wanted to hear that voice of experience
  4. What is the proper procedure as far as over drilling holes for dowling and type of wood dowl and glue ect.
  5. I just had to replace my serverely damaged body on my strat. the problem is the holes in my neck are just a bit off line with the new body making the neck run slightly down causing the high e string runs nearly off the bottom of the frett board near the 12th frett. its playable when we pull the neck to the top side of the neck pocket while tightening the 4 bolts down. the neck and pocket are fairly tight. what is the best way to keep the neck in position i thought of a shim at the but end of the neck on the high e corner to push the head end of the neck toward the low E.
×
×
  • Create New...