Jump to content

teddybear

Established Member
  • Posts

    48
  • Joined

  • Last visited

Everything posted by teddybear

  1. no response thats why i made this thread T_T
  2. Looking like this one. Switch, Alco, DPDT, On-Off-On, Fat MTG-206P thanks....
  3. are 10" enough to copy 1st fret and 12th fret at contour gauge?
  4. yngwie didn't mod it, but fender custom shop did.
  5. who says that? in the newest yngwie signature series, you'll find it. i take from the site Unique Features: Scalloped Fingerboard, pickups, machine screw neck mounting see
  6. wanna more frets? try this one at the singlecut back. happy making.... :cheers
  7. You can get #10 threaded inserts and machine screws at any hardware store. #8 might do too, but I stuck with 10 because that's the size of the normal neck screws. If you want to buy online you could try ebay or Ed Roman sells a kit(though it costs way more than the hardware itself would, $20): http://www.edroman.com/parts/IS_specialparts.htm#DCK Woodcraft has the inserts, but I'd stick with their 8-32 because the 3/8" pilot hole for the 10-32 might go through the side of the neck. http://www.woodcraft.com/product.aspx?Prod...p;FamilyID=1048 Machine screws are easy to find, you probably want 1-1/2" length, measure your neck pocket to see. It's better to buy hardware in-store though. great... thanks nice info.....
  8. Where i can find this screw? like yngwie stratocaster... inside the neck machine screw
  9. I wanna repaint my bigsby bridge to black, but don't to do. anybody could help? give tutorial?
  10. any info to mod standard fender single coil pu to low noise?
  11. any recommended 3band preamp using gain and volume for piezo? schematic? tq
  12. finally found the info http://www.shadow-electronics.com/web/serv....html?lang_id=2
  13. any information about this pickup in epiphone ultra-II?
  14. wiring for H-H with 1 volume and 6 way rotary switch (2-poles).
  15. need info and help for wiring the switch.
  16. kidda confuse follow the thread to 233 pages. that't why any update/change log from mike started? thx
  17. any update to the tutorial? why didn't update the first page?
×
×
  • Create New...