ALTSELGREEN

Thanks everyone for all your comments. I have now used that neck on another body and everything is fine there. So I still have this body sitting here with no neck. Ill have to think again on this one.

ok Ill give it a go http://i69.photobucket.com/albums/i80/samj...rs/strat008.jpg http://i69.photobucket.com/albums/i80/samj...rs/strat007.jpg http://i69.photobucket.com/albums/i80/samj...rs/strat006.jpg http://i69.photobucket.com/albums/i80/samj...rs/strat005.jpg http://i69.photobucket.com/albums/i80/samj...rs/strat004.jpg

http://s69.photobucket.com/albums/i80/samjskywalker/Guitars/

My guess is I need a 24 fret neck for this body-Out of interest the measurement from the rollers on the Kahler to the neck pocket is 6 1/2 inches-don't know if that is relevent.

Mickguard-having just had a play around I think you have hit the nail on the head-Im sure I need a longer neck with no overhang.

Thankyou for all the replies-I have some pictures uploaded for you guys to look at here: http://s69.photobucket.com/albums/i80/samjskywalker/Guitars/ The first two pictures are of a squier 21 fret strat neck that I have used to compare the wd neck.

I am more inclined to think its the scale of the neck, as the body simply would not look correct with the tremolo moved far back on the body. Neither would the pickup.The routing was professionally done so someone had a solution to this problem. Could it have been a specially made neck with a unique scale?

Being as accurate as I can-the measurement is 12 3/8" .

It could have, and it would make a difference. What is the length from the fretboard side of the nut to the saddles? Hi Rick Thanks for the reply. from fret side of the nut to the rollers on the kahler is 25". I dont think that is correct.

Hello all Im pretty new to this game and would like some advice on a project that I thought would be pretty straightforward to something that is becomng a bit of a disaster. I decided to have a go at assembling a Strat style guitar for my son from various components (some used -some new) that I managed to obtain over a couple of months. I found a strat style body already fitted with a single schaller humbucker and routed for a Kahler 2300 style tremolo (The original owner had fitted a Kahler). I obtained a nice quality 22 fret maple Strat type neck which fitted perfectly and managed to obtain a kahler tremolo which fitted into the route and lined up well with the original screw holes. I fitted some vintage gotoh locking tuners and finished the guitar in an EVH early frankenstein scheme as my twelve year old is a great Eddie fan. All great- except I now have a problem with the scale length? The guitar is impossible to intonate as it would appear that the bridge/trem unit is too far forward as the saddles are at their rearmost limit and the 12th fret notes are all sharp with no further adjustment available. Why should this have happened? Did the original guitar have a shorter scale neck do you think? Would this make a difference? I am sorry for my ignorance in these things , but any help and advice would be gratefully received. Thankyou