Rand-O-Monium

My Blackmore strat has the recessed Dunlops,they actually do seem to work better without the "stress" on them. Wish I could put 'em on everything...

Bump for Brian!!! Please PM me!!! R-O-M

I'd say a Chopper in the nk,Tone Zone or Norton at the bridge. A lot depends on the amp & guitar... But the previous would be my 1st guess...

No. I talked to "the help" about 2 weeks ago about getting a Floyd nut shelf installed,he said the guy who does the work just kinda pops in every now & then,picking stuff up or dropping it off.I left my # & what work I needed done,haven't heard anything,but they usually are kinda busy during the holidays. I talked to Buddy @ Don's,but he said just to bring it over & he'd take a look,but I still have to get a coupla' parts before it can be completely assembled.I think the replacement nut is gonna be the biggest PITA to get,I've found some tuners on eBay,& I'll probably get the p/g from Warmoth.I also may have to buy a 4-bolt neckplate,as well,but the guy I got the body from supplied the original 3-bolt style. I've got a friend who can do the p/up & bridge routes,but I'd rather pay someone a little more for the "detail" work... Happy Holidays,Brian!!! Did you ever find out about the Sonic Blue Bobbin Toppers? I need to order a few black & cremes,but I figured I'd find out what was up with the blue ones before ordering... Thanx again,fellas!!!

Well,I did get the body off of eBay($80ish),but...umm...another pause... It's been refinned "Gloss Pepto Pink",routed for a bridge hb,& the Floyd studs are installed... I'm just putting one together that I've wanted for a long while,but I had no money & there was no eBay back then...But at least I had some hair!!! When I'm done,it'll be 2 hb with a black p/g & pink mounting rings!!! Pretty "gaudy",eh? Our singer's gonna HATE it,so I'm trying to keep this on the "DownLow",as the kiddies say!!! I WISH it was original '79,I'd put my Blackmore(MIJ) neck on it!!!

I'm gonna have it done by a pro,so I'm sure I can trust the work.I was just wondering about how much it would cost. Also the body is set up for the Fender 3-bolt set-up(I've got the plate),but would it be safe to assume that it'll "HAVE TO" be turned into a 4-bolt? Thanx again!!!

Hi! I've got a late '90 Jackson "Professional Series"(import) neck that's going on a '79 strat body. The neck pocket isn't wide enough to accomadate the Jackson neck,& even when it will be widened,the fretboard lip is going to sit very close to the top of the body.I'm assuming a back-route will be needed(OFR) for more "up range". 2 questions,mainly... 1)About what would I be looking at($) for this routing work,& 2)Approx how deep should the trem route be,I usually like to have at least a whole step up,but a coupla' my guitars go up about 2 1/2 steps. Thanx in advance!!!