Search the Community
Showing results for tags 'archtop'.
This is a project which will have a reasonably lengthy build-up time, so this thread exists purely to gather information, consolidate the design and work methodologies. A little background. I have never built an acoustic or archtop previously to this, so much of this particular thread will consist of my research and references to information online or from books, etc. The Gibson EB-750 and its sister the EB-650 were extremely rare (less than 100) basses built upon the designs of the Gibson ES range. The EB-750 was (as far as I am aware) the same underlying design as ES-175 but with a bass neck and a bridge placed further towards the rear of the instrument. My initial proposal is to build two basses, one with the same archtop design as the ES-175 with the longtitudinal braces and another with the more ES-335 style of build having a large solid central block between the arched back and top. I predict that these builds will be more likely to happen towards the end of Spring or worst case towards Autumn 2013. In the meantime I will be examining and refining more of the project specifics including things like moulds, methods of making the sides (laminating/bending) and the all-important back and top carving. Hopefully throughout the process we can document and critique processes fully for the purposes of tutorials, etc. Is anybody familiar with the EB-750 bass or in fact the ES-175? There is plenty of room for discussion on this one.... Cheers.