Search the Community
Showing results for tags 'parsons street'.
I just finished installing the Stew Mac Parsons street PAF's in my old Epiphone Sheraton ii. I also put in a harness from BCS guitar with the Bournes mini pots. (I was too lazy to make my own.) The quality of the harness is top notch: great soldering and I like the schematic and mods they used rather than many I've seen on the internet. The pickups are AMAZING! Turned the guitar into an ES-335. They sound like PAF's and fully bring out the semi-hollow sound. They are very clear - almost too clear and deliver a lot of "punch". I found I needed to tone done the brightness on both pickups to get the sound I wanted. I found in playing with distortion the pickups do not require very much to give them the "growl". I used the Alnico 5 in the neck and the Al 2 in the bridge. The only downside is that the al 2 doesn't have quite as much output. Possibly a soldering issue? I'm not willing to disassemble the setup at this time to figure that out ( you know what its like to install an ES-335 harness!) Based on this experience I may try their Tele pickups for my build. I bought the PAF's with the gold covers. Excellent deal for $118! One other issue: Go to the Stew Mac home page first before going to the Parsons Street page. For some reason if you go directly to the pickups page from your search engine, the pups are $148 for the set!