Search the Community
Showing results for tags 'single coil'.
-
Hi everyone, I just subscribed to the forum and i never built a guitar, but is my dream one day to do so and I'm already imagining how it would turn out. I have this general idea of a pickup configuration in mind and I don't think I ever seen a guitar exactly like it, i wonder why, and that's why I would like to ask you what you think. I would love a single coil in the neck position, a P-90 in the middle and a hambucker in the bridge, with a 5 way switch strat style: neck, neck and p-90, p-90, p-90 and humbucker, humbucker, with the humbucker being splittable (so that i could combine p-90 and split humbucker, or just a split humbucker in the bridge for that twang). What do you think? is it stupid? there's already guitars with this configuration out there? I think it would be just so versatile! Thank you very much in advance! Giovanni
-
Hey guys, I am building a guitar and I want a humbucker in the neck and single coils for the middle and bridge positions. I would like 3 volumes and 3 tones, is this possible? If so, can someone get me a diagram or does anybody know who I could contact to get the info? Thanks a lot!
-
So i am a proud, scratch that very proud owner of a first generation Peavey Vandenberg serial no. 00000840.ok that wasn' the original reason for posting but after a bit of probling i was looking into the pickups and i dig the single coil but its very, very weak. peavey documentation describes both pickups as medium high output alnico 2. and this is a 6.8k pickup in the neck i have had squier pickups hotter than that. however i digress after a closer listening and inspection i thought that it was a short because sometimes it sounds better than usual and sometimes its thin city so i checked all the wiring and the pickup itself and nothing seems wrong same reading as a few weeks ago when i bought it. So i am going to wind an old replacement pickup a bit hotter with some heavier wire and then drop it in. of course keeping the original pickup. but for a quick drop in single coil what kind of replacement would be good? the body is poplar and i have no solid experince with this wood and the last time i had a non traditional strat with a neck single was years ago so i am a bit at a loss. also i have a few pics of my 37ga wire p-90 and Single Coil that i wound by hand and potted tonight. i have yet to install them as the wax is drying and they still need leads soldered on. but the weirdest thing is i wound both of these rather quick piling on way more wire [well there is more wire bulging off the form than before. i realize that it is a bigger wire but the p 90 from duncan only had on its form half of the space used and measured 11.1k. i wound it till it was spilling off the sides and got about 1.5k so we will see if these little buggers will even do anything lol] super low resistance, i know the larger wire you get less resistance but i wonder if there is a formula for gauge vs winds vs resistance or simply guage length resistance. well any help would be appreciated and i will post some better pics of pickups and guitar soon my phone is dying ciao for now