Jump to content

Search the Community

Showing results for tags 'tele'.

  • Search By Tags

    Type tags separated by commas.
  • Search By Author

Content Type


  • Instrument Setup
  • Instrument Building
  • Electronics
  • Finishing/Refinishing
  • Inlay and Binding
  • Repair and Maintenance
  • Tools and Workshop Tips
  • Miscellaneous


  • Guitar Parts
  • Tools and Consumables
  • The Library


  • Guitar Anatomy Class
  • Workshop and Tools
  • The Tipshop
  • YouTube


  • Patreon-only Area
    • Season 1
  • ProjectGuitar.com Forum Guidelines and FAQ
    • Community Guidelines and FAQ
  • ProjectGuitar.com Guitar Of The Month
    • Current Guitar Of The Month Contest
    • Guitar Of The Month entry/poll archive
  • Build Area
    • In Progress and Finished Work
    • The Design Bar
    • Non-Guitar Build Section
  • Tech Area
    • Solidbody Guitar and Bass Chat
    • Acoustic and Hollowbody Guitar Chat
    • Inlays and Finishing Chat
    • Electronics Chat
    • CNC Chat
    • Tools and Shop Chat
  • General Topics
    • Site Feedback, Issue Reporting and Test area
    • Players Corner
    • Put it to a vote
    • The Luthiery Business
    • The Marketplace
  • Forum Tutorials & Reference


  • Documents
  • Guitar Drawings
    • Component Drawings
    • Instrument Plans

Find results in...

Find results that contain...

Date Created

  • Start


Last Updated

  • Start


Filter by number of...


  • Start



Member Title



Found 10 results

  1. so officially starting up my next project... 3 teles. Working on templates for now, and have setup my body blanks... but figured I'd kick the build thread off. so first up... "The Broadchaser". Planning this to be sort of a 'modern classic' - vintage looks with modern electronics (more than likely 6 way rotary). The main milestone here will be doing a relic finish. This one I'm calling the "Gipsum Les Flaws". Sort of tongue in cheek - not sure if I'll stick with the inlay/name as I don't want to anger the gods... but this should be a carved flame top over a quilt maple body... laminated set neck, 27.5" scale length baritone. finally, what I'm calling the "Tuxedo". 30" radius top and bottom. Semi hollow. that's what I'm aiming for anyway. As always all comments, questions, jokes, asides, bedtime stories, laughs at my expense, completely unrelated content - welcome in my thread. ===========update 11/29/19 10am ===================== so almost done with all my templates, but waiting on some 1/8" straight bits for headstocks, fholes and other detail items. here are my three body blanks weighed in at the start... first up the baritone 'les flaws'. I bought this body on craigslist for $40... it's solid quilted maple and was already hogged out. needs a little tlc on the shape and the centerline is about 1/8" off. Thought it'd be ideal for a baritone as the maple is hard and bright and lower notes will benefit in tightness. this one will be the 'tuxedo' blank. and finally the broadchaser blank at 1 15/16 weighing int at a hefty 8lbs 6oz. here is a blank I made up of a wenge center with flamed maple outters. both the les flawes and tuxedo necks will come out of this piece. below that is a heavily flamed piece I'm using for the broadchaser. here are the 'les flaws' and tuxedo blanks cut apart and planed down rough. "If they don't find you handsome they should at least find you handy" -redgreen. Started working wood last night on my "broadchaser". So with that in mind I hope to learn something here and perhaps someone else will find it useful. How much weight will I reduce by doing 'x'. So below is a series of picks detailing my tele body weighed at differing points. My ash isn't as light as I thought (apparently my estimate was off a bit) so I figure I need to get it down in the 4-5 lbs weight range at the most. taking off 1/4" of wood dropped it down from 8lbs 6oz to 7lbs 9.4oz. cutting it to shape took me from 7lbs 9.4oz to 6lbs 12oz cut my pickup and control cavities to 1 1/4" depth... in hopes of removing as much weight as possible... that took me from 6lbs 12oz down to 6lbs 6.3oz I could still remove a little off the back and get down to 1 1/2", and I think I will, but I'm guessing that isn't going to remove enough... so now I have to build a template to make a smugglers route. Since I have to do that anyway, I've decided I'm going to go back to a single coil in the neck and do a 'hidden' coil just under the pickguard and just in front of the bridge so I can keep my wiring interesting. =============update 11/30/19 ============================ hogged out some smugglers route and got down to 6lbs 0.5oz in the cleanup looks like we eliminated another 6oz for a total of just under 12oz removed. cut the join for my les flaws top... glued it up my join turned out really nice - more due to the extra time taken to ensure a flat edge with shims and some hardwood with notches that were sitting underneath. here's the bottom - hand sanded for less than 5 mins to get it clean so must've done it right. did a wire channel in the body for the pickups/toggle but the neck tenon will close this up partially, will have to reroute that section once the neck is on. hardest thiing I've done so far... not that it's spectactular or anything... but getting this right really challenged me and too a long time! alternate headstock shape for the les flaws. really pleased with this top. this is one I got from downhomewoods and have had it for quite a while... just realizing now it's actually quarter sawn. not sure how easy it is to see... but it's got some really cool shimmering fleck. ===========update 12/2/19========== got to work on the tuxedo... finally broke the 5lb barrier with the back trem route: the les flaws weigh in... the current state of affairs: apparently something going on with my initial post... i don't know if this is like this for anyone else... but the last few images won't load. not sure what's going on there but it's making me really sad. can't update that post anymore either. some sort of link to this image below that keeps getting restored... oh well. I'm aware it's a dup! a vid of my progress and a song... could say I'm a song and dance man now... =========update 12/3/19=========== just a few minor things... planed down my broadchaser body another 3/16 and ended up just a hair above 5lbs... started working on the back access and cover routes for the les flaws =============update 12/08/19================ put my steps in 4lbs 10.5oz did my neck joint on the tele... nice n tight: put the 1/8" roundover on and got the pickguard aligned and it follows the horn nice... rough cut my my steps for the tele carve My neck angle jig slipped again and I screwed up my blank for the tuxedo... so I ended up building a new sub-jig for the neck angle. Bolts on either side of the pivot bolt allow me to dial in the angle with precision and they lock themselves in position. worked like a charm! put the angle on the les flaws w/o issue: so when life gives you lemons... switch to quarter-sawn mahogany! on the tuxedo blank, I could have saved it by cutting my nut slot 1/16 deeper as the angle only ran about 1/8-1/4" into the fretboard area but I figured rather than do that I'll save it for my next gibson scale neck. I was only using that blank because I had enough material leftover from the neck for the baritone... and it hadn't occurred to me that I have some 3x7 mahog that would allow for a quarter sawn neck given the tux's narrow profile. So I milled that down today... ============ update 12/9/19 =============== got a lot done today and can barely type at this point... got my neck machined for the tuxedo... here's how I cut the neck pocket for the tuxedo... nice tight fit started working on a radius for the internal route... but quit pretty quick. I need a long bit with a bearing and a very short cutting edge. was scary because you can't see anything and with the bit I had -as I cam to the center the bearing would be out of range. so save that for next time. you can see here I just did a little corner... went back in and carved it deeper with my bowl bit since I'm not doing the radius route. then started my outter radius and about 19 passes later... so setup up on the backside... and another 19 passes later... this thing is COMFY! ==============update 12/15/19 ================ put some tru oil on the innards of the tux... did the neck holes for the tux did the neck holes for the broadchaser... then did a lil video of joining the top for my tuxedo here is the result: put in my f-hole in just 974 easy steps! and switched back to carving my les flaws: wow, much more work than I thought! should have done more steps (next time). ======================update 12/28/19====================== awaiting some parts and kind of left to all the minor details of my builds for the time being, so thought I'd spend some time on my plans for electronics: first up: the tuxedo. going to be using a seymour vintage stack for the bridge, and a 4 way tele switch. I have a 4 way in a tele and didn't realize until recently that the two middle positions where NOT the two combined positions... so I changed this on my version as I prefer Bridge, BN Parallel, BN Series, Neck. Also set it up so that the bridge will be in stacked humbucker mode in pos 1, but split for the two combined positions 2 and 3. Figured it might be nice to go back to single coil for the bridge position so I've got a push pull that will accomplish that, and also swap between 50's and 60's style tone control with the lead for the tone swapping between the pickup side and the jack side. next up is the broadchaser: I'm putting a hot rail in the 'hidden' middle position so that I can use either rail for hum cancellation. That rail is a bit mismatched with the bridge which should allow the bridge pickup to dominate for a little less hum cancelling but a little more bridge flavor. Using a 4 pole 3 throw switch here for stock tele operation plus two additional modes: parallel humbuckers and series humbuckers. finally, the les flaws: I don't generally tend to care for the split singles by themselves from a humbucker, and the humbuckers I'll be using are sentient/nazgul which (I'm told) don't sound great split anyway... so I figured I'd do a simplified version of my signature "all combos" wiring... and just focus on the 4 humbucking combos: bridge-vs-neck-parallel, inside-vs-outside-parallel, inside-vs-outside-series, and bridge-vs-neck-series. Going to etch a pcb to keep the wiring of the 4p4t clean. Using a unique alph 4p4t switch that is fairly small... might have some issues getting it fitted in the carved top but... will cross that bridge. Also planning an active mid boost mounted on a push pull for this one... I have a jackson preamp etch lying in wait, and an sho... but I loved the 'switchblade' in my sweet spot build so much I might etch another of those... haven't decided. ================update 12/29/19================== shot of my setup to add the taper to the back of my necks. I started out with a common neck profile drawing for a late 50s tele. I have marked the neck with the depth from the top down at the first fret and the 12th fret... then I set the depth of the router to go right up to the mark at the 1st fret... and raise the other side of my planing rails until the blade of the router lines up with that mark. and here's the product of putting in that plane... and he is my tuxedo neck with the grade planed in. shaped my neck for the les flaws... my first experience with wenge and sharp corners right on end grain. installed my truss rod for the tuxedo... and installed my truss rod for the broadchaser: decided I would use some offcuts from my tuxedo top to join together for a headstock overlay: cut the 4 degree slope in my les flaws... had to go snag some 6" bolts to get the correct rise/run... then feathered that into the rest of the body: did a test fit for my 4 way switch on the tuxedo and found I needed to remove a little more material... also have carved in my belly cut and neck transition (will show that later)... final weigh in before adding the top: so was thinking tonight... about a jig I might make to cut the 94 degree cut into the back and sides of the neck where it meets the body and it occurred to me...why not just make it easy on myself and cut a 90 degree transition from the 4 degree plane? This would be 86 degrees relative to the body. Then I can simply make all my cuts on the neck at 90 degrees. Skip the need to build a jig, skip that pesky sanding to match the angle... and since this isn't a traditional les paul build... no reason to not hit the easy button. Here's my 86 degree line: ==============update 12/04/2020============== started work on the broadcaster finish. wanted to document my steps here as who knows... might turn out good. grain fill: finish sanded to 320, made up some grain fill using some rit camel die... sort of a chocolate milk color. generally with ash, and with this grain filler, it's going to take a few passes of grain fill as the filler recedes. In this case... I don't want to totally fill the grain, so I'm going to do one pass. sanded back the grain filler and prepared for first coats of laquer. two light coats of mohawk whitewash laquer. since the grain is not fully filled... the whitewash sort of 'dissapears' into the heavier grain. works to my benefit here as it's keeping the grain more visible which I like, however it's still so open that I decided to do another grain fill but this time clear. my plan is to let the grain fill sit overnight and sand it back. have a couple spots that got a little too much white so will feather those out as well. did did my binding channel on my les flaws. Piece of binding seen here sitting just a hair proud in the neck join area. and worked on my broadchaser neck... used a chamfer bit to get my first facets done... then completed those facets with my rasp: completed a secondary facet... hard to see here but I have drawn lines down the center of the neck to show me where the facet ends... from there I approximate a 67.5 degree chamfer. this neck will have a vintage spec soft v... have owned a hard v but it was a bit much... thought this might be a nice pairing with the 9.5" radius fretboard. Here's a shot of her all sanded up... =================update 1/10/20========================= slapped some frets on the neck... amber dye here is looking pretty orange but a lot of that is my camera... sneak preview of my butterscotch body in the corner... ==============update 01/11/20================= did some relicing to the hardware... control plate was the first thing I did and started out with fine steel wool to remove protective coating but it didn't do enough damage so switched to coarse... that was clearly too much! Not crazy about how it turned out so will redo that... and didn't realize the knobs are a hair small for my pot shafts so will have to order some replacements. All in all it went ok. wired up my broadcaster controls. again no tone control here. have a middle hot rail hidden under the pickguard that will be used for hum cancelling. mode 1 will be std tele operation. 2 will be the tele pickups operating as parallel humbuckers with each one paired with a single rail. mode 3 will be the same but in series. the vero board there is just a common place for all my pickups to be wired to. In case I've got something wrong I just swap the positions and don't (in theory) have to screw with my heatshrinked wires. ==================update 01/12/2020===================== some shots of the body... looking pretty tan in this light... inner binding - and one picture says it all in terms of frustration! side note - did you know binding is easily set on fire via heat gun? binding the headstock overlay was seemingly easier comparably! ============update 1/19/20=============== note to self... next time separate the builds into a post each... pretty hard to follow 3 disparate builds! finished and bount my les flawes headstock. got a couple little spots at the points that will require some attention but pretty solid. got the top on for the tuxedo... the f hole is fully bound, top trimmed, binding channel cut just after this. working on adding the body binding now. On the radius for the top, I left a flat spot for the tele style trem king... was concerned I'd have little gaps as it transitioned from flat to radius (I broke them lightly) - but it turned out good. have 1 little spot where I didn't get glue squeeze out because I was a little too conservative with glue but pretty minor. took my pickguard and heat bent it over the body no problem. routed out the neck pocket (little overhang on the pickguard) and the p90 slot for it. ============01/25/20=============== got the binding on the tuxedo... got some inlay done... but funny thing happened. turns out this 25.5" scale length fretboard has fret slots from a 24.75". the must have put the slots in the wrong one... (or perhaps I ordered a 24.75sl board. oh well. could order a new one and some new inlay... but this is an opportunity to try a 24.75sl on a tele... so think I'll go back to my orig blank and make that work. (mmmm, lemonaid). gold mop on granadillo and white mop on ebony... also, finally got my broadcaster to check... check please! remember, it's not the size of your check that matters... ===========update 1/28/20=================== +++++++++++++++++++++update 2/15/20 ================= So... back b4 finishing the broadchaser I had realized I bought a 24.75sl fretboard instead of a 25.5 (for the tuxedo). well I got this far on it before I realized... did a gold mop logo for the les flawes and white mop for the tuxedo... test mounting my neck for the les flawes Just a hair of a gap at the outter edge of the corners on the back edges here - the side joints are solid right up to the last 3/16 and I think I'm going to be removing most of that with rounding up that area... so pretty satisfied with the join. made a fun video about the neck join... mock up w the fretboard did you spot it yet? (below) ================== 02/27/20 ======================= getting close... =============================== did my wireup for the tuxedo... etched some random pcbs for everything from a guitar mounted brian may treb boost to a haz lab bass pre to amz mini boost and ovation piezo preamp and even some labeled pickup panels... did my truss channel for the les flawes... did my fretboard truss access and glued her on using hot glue gun and blocks to get it center. worked pretty good. also got my frets on...shaped the neck for the les flawes using the facets method loosely as I always do... just using 3 measurements to do 3 facets... and I come out with the profile matching w/o even trying... ============================================update 3/29/20========================== ===============================UPDATE 9/25/20====================================== So... this is where I started... lucky build #7 DONE! originally had planned to do more of a tobacco burst but with the quilt maple back I changed my mind to red... and that just wouldn't look right so saving that for next time! thank you again to the forum here for your encouragement, advise, console and responses to this thread! Was a heck of a journey for me and I appreciate y'all being there! here is where I ended up:
  2. I saw the four position Telecaster switches that Obsidian offers and got to thinking I could use two of those to create an interesting sound chain in a dual humbucker design (one switch per humbucker). My thinking is that I can wire the switches to give me the following options: single coil (bridge side), single coil (neck side), both single coils (parallel), and humbucker. Combine that with a three way toggle switch (ala Les Paul) and I imagine I could have the ability to create a guitar with 24 pickup sounds (4 single coil, 6 dual single coil, 3 humbucker, 4 tripple single coil, 1 quad single coil, 4 humbucker/single coil, and 2 humbucker/parallel single coil). Has anyone here tried something like this? Has anyone heard of anyone doing this?
  3. Hi guys (and gals)! I am not just new to this site, but to guitar building as well. I have created a YouTube channel ( https://www.youtube.com/channel/UC6U6BfZTF3u_K2G-rql_HsQ ) to document my progress. Once I complete a build, it will be given away to one of my subscribers who comments on at least one video of the build series. I am certain I will make mistakes and do things differently from how the awesome luthiers on this site would and I welcome your feedback. The first video is a review of the inexpensive kit I am using for my first build. You can see it here. I look forward to your comments and critiques.
  4. Hi all, I haven't posted any guitars in this forum before but thought I'd show you a recent build. This is my version of a Les Paul Junior. Australian Red Cedar top on a Mahogany body. Mahogany neck, Ebony Pickguard, cavity cover, truss rod cover and fretboard. Mick Brierley P90 hand wound pickup. Grey tiger Capacitor. Gotta love that 50's sound!
  5. Hi everyone! This is my first post - and first build - so bear with me if I'm still learning! In summary, my uncle has offered me a guitar body that he made and routed before he retired as a carpenter; I haven't seen it yet, but I'm told it has a Tele-shaped basswood body, with body cuts and is routed for a floyd rose bridge and 4 pickups - two humbuckers at the bridge, and two single coils at the neck. I've been looking into what to do with this, and I decided that it would be fun to try and fill all four routs, however, my experience regarding guitar wiring is limited at best, and this is not a design I can simply find a standard wiring guide to online! A friend of mine is able to help me with a lot of the basics - he suggested 4 individual pickup switches might work better than one rotary 7 way switch - but I'm not too sure how to connect it all up. So really, I have the following questions: I'm looking at the Rolling Mill (PAF) and Steel Foundry (Tele) pickups from Iron Gear, but would you suggest that having a bridge-neck, bridge-neck arrangement would work? Would these pups fit together? And secondly, theoretically, without seeing the guitar, how would you wire this kind of arrangement? I should be getting the guitar this week, so when I do, I'll upload some photos for you all to look at. Otherwise, I'm open to any and all suggestions about where to go with the project - thanks in advance for any help you can give! Oliver.
  6. Hi Here is how I shaped the body for my Tele Style DIY kit.
  7. Project guitar Hello ! Thanks for stopping by ! I am building my first electric guitar (thus me being new on projectguitar.com). I will make a review of my build on YouTube or instructables and I'll gladly share it here, but I'm not finished yet! I need your help with the finish. This is my thinline/Nashville tele. I would have had loads of photos to show you but I still haven't figured out the 501 MB file thing for uploading photos.... Here are a few facts about my build : It is made out of two mahogany panels (each made of two pieces) glued one on top of the other. The "glue line / separation" shows a lot, and I've had to fix some holes on the sides ; I want to hide them. Right now, I have dyed the body brown, sanded it down to give the grain a kick, and I've given it one layer of spray varnish (spray varnish being the closest I could find to spray lacquer) I do not have access to spraying equipment, it's all aerosols for me. I want to give the body a dark burst on the sides but I realized on some scrap wood that the black paint have doesn't look good with the orange wood at all. This is where you can help me : what kind of product and method can I use ? Will it be another type of paint? More dye? Really really dark brown varnish that goes black if I spray it heavily? Thanks for reading, I hope someone has advice!
  8. Hi, first time poster! I have googled around and searched the forum to see if I could find some answers to this question but I've not been able to locate any. Help very much appreciated! I've just finished building my first guitar (Tele copy from premade neck and premade unfinished body) and it looks great and plays lovely! However, I can't get any signal from the bridge pick up. I've looked at several possible issued/solutions but can't figure it out. I'd be very grateful for any advice, as I've not been able to identify any solutions anywhere online and I'm a bit stumped at this point. I'll do it in bullet points for easier reading: pickups are Fender Vintage Noiseless single coils, new out of the box; neck pickup works absolutely fine and sounds great; I raised the bridge pickup until almost touching the strings and it barely made a sound then; if I touch the joint where bridge pickup wire joins the switch with a piece of metal it makes the same sound as if I do this for the neck pickup wire join; if I tap the metal part of the bridge pickup with a metal object you hear this through the amp (possibly not as loud as if I do this with the neck pickup; I have not added an additional ground wire from the pickup to the bridge or control panel. There is a ground wire from the pickup, same as from the neck and I thought this would be sufficient. I believe (and I could be wrong) that all this would do is reduce hum; I also have not yet shielded the cavity, although again I believe this would only serve to reduce hum; when I got a weak signal from the pickup (sounding very metallic / tinny) I looked again at the wiring and saw a point where I had burned the wire casing (although exposed wire inside looked fine). In case this had damaged the wire I cut it back to this point and resoldered but then there was no signal coming through at all. I think this has covered everything, I do have a couple of photos should you want to see them but it's a little chaotic! (First job, and soldering iron is probably a bit too big). If the neck pickup works fine then I assume the problem has to be somewhere between the point in the switch it joins and the pickup itself. Potentially a bad solder join, but I've redone the joint several times already without success. Thanks in advance for your help, and I've enjoyed looking around at some of the guitars built in here! I may post my first effort once I've got the pickups resolved (I'm waiting to get this done before I screw a few last things down).
  9. I don't know how many of you will remember me, but I am back in the luthier business! I finished Davids PRS (#3) and then took over a year off. It was quite stressful at the end, but had many lessons within. Here is a pic of it all done. More upon request (as with the rest as well). Before that (for anyone who doesn't know me) I built 2 tele's (one is my first, other commision) and then completed (routed, finished, set up) a tele from an ad on kijiji for 350$ Between then and now, I attempted a dual build and learned more, and didnt finish them off. More lessons, mostly with fretting and neck thru's. So after the haitus, and first year uni I wanted to get back into the game. I posted some ads, then got a hit from the local musicians facebook page. A tenor firebird. Not traditional, but I'll take any commission at this point. I have 2 other builds going on (next post) but here is the progress so far on the Tenorbird. I started a few days before Xmas and here we are, waiting on LeeValley for the drill bits for the 6mm dot inlays and the 11.9mm bit for the bridge posts. Here's how it all started (sorry for the quality, I just snapped them with the iphone and didnt bother using the real camera. This is changing! The ash is also not that brown...not sure why the camera is making it that way) Spec Sheet Lumber Body all cut out/routed Mock up Pickgaurd rough cut Logo inlayed - what do you guys think of the design? It's supposed to be a guitar pic, and the letter J Neck pocket routed, not glued yet!
  10. I am building a 12 string Gretsch Tele. Here's a video of where I am at on the build. I'll post pics soon.
  • Create New...