catnine Posted December 22, 2004 Report Share Posted December 22, 2004 Just from the body side of the nuts face to the centerline on the 6 trem screws . If anyone can give me this it would certainly help . Quote Link to comment Share on other sites More sharing options...
Uncle Os Posted December 22, 2004 Report Share Posted December 22, 2004 25 3/8" give or take a hair. If it's a standard trem type, it should intonate with that measurement. Respectfully, Cor Quote Link to comment Share on other sites More sharing options...
catnine Posted December 22, 2004 Author Report Share Posted December 22, 2004 I thought I had mine too far back and it' a hair over 25 1/4 " from the body side ooof the nut to the centerline of the 6 trem pivot screws . It is a standard strat trem , not fender brand but a replacement from stew mac . Quote Link to comment Share on other sites More sharing options...
Uncle Os Posted December 22, 2004 Report Share Posted December 22, 2004 Hey there catnine... I'm not the pro most of the folks around here are so they might be able to be more exact. However, I did a strat this past week with that measurement and things worked out fine. Most folks measure to exact specifications. Um... Not always. I set the saddles as near to the center as I can, measure 25.5" and mark the two outmost holes. Remove the bridge and make a line. Then I make my center marks and drill. Just turned out to be 25 3/8". maybe someone else can be more exacting. Respectfully... Cor Quote Link to comment Share on other sites More sharing options...
catnine Posted December 23, 2004 Author Report Share Posted December 23, 2004 Thanks for your help . I just found on the stew mac site a builders guide and it has a step by step process with all the dimentions . Quote Link to comment Share on other sites More sharing options...
Uncle Os Posted December 23, 2004 Report Share Posted December 23, 2004 Can you give me a link? MLAR, Cor Quote Link to comment Share on other sites More sharing options...
catnine Posted December 23, 2004 Author Report Share Posted December 23, 2004 Here is a link http://www.stewmac.com/freeinfo/I-4003.html William Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.