Bizzar_Guitars Posted March 28, 2005 Report Share Posted March 28, 2005 I did it on mine: -I used steel 3/8" rod, cut into 1/8" thick pieces. -Wet sanded one surface to a mirror-like surface with 2000 grit sandpaper. -Wrapped in a layer of shrink tubing (to blend in with the black stain). -Glued the markers in the holes just slightly below the surface of the fretboard. -Because of the mirror-like finish, I was able to adjust each one so they were all level on the same plane. -Once the glue had dried, I placed a few drops of liquid finish on the top, creating a sandable surface. -I had already applied the radius to the fretboard before doing this. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.