justaguy68 Posted November 17, 2007 Report Share Posted November 17, 2007 (edited) Hello, I am hoping that maybe someone can give me some help with a wiring problem. I was attempting to install new volume and tone pots in my Les Paul. It has two humbuckers. Since I didn't have a diagram, I just switched all the wires from the old pots over the the new ones, one at a time. I replaced the volume and tone pots for the bridge pickup first and then checked it and it worked just fine. I then replaced the pots for the neck pickup, but when I checked it, the neck pickup worked fine but the bridge pickup doesn't work now. What could be causing the bridge pickup to not work? It was working find until I wired the neck pickup to its new pots. Any help would be apreciated. Edited November 17, 2007 by justaguy68 Quote Link to comment Share on other sites More sharing options...
Keegan Posted November 17, 2007 Report Share Posted November 17, 2007 Do you have a picture of how it's wired now? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.