green_axeman

Hey Wammi

I'm looking to install an original 2300 on a strat,but I'd rather like to recess it into

the body. Does Kahler have routing templates to do this? I have a template to rout

for the cam assembly,but I'm having a hard time finding a template for the body

of the bridge shape itself.

If not, do you know anyone who can make a template, or where I could find one?

I can do the layout and can do the routing myself,I'd rather not pay extra

and send the body out and have it done by someone else...

If Kahler would design one of these, I'll be the first in line to buy one!!!!

Hey Skyflash

Hope I'm not too late to be of assistance,

I'ts EASY-----

Just route the main hole for the trem, but a little bit deeper,

say, about 3/16", (the thickness of the trem body/plate) depending on

how low you have to go.

Then sit the trem in position and draw around with a pencil

and there's your routing guide !!!!!!

That's how I did mine about 15 years ago, worked fine, and still working !!!!

The top of the trem body/plate is set flush to the top of the guitar.

I had to do this because I had set the neck in my new guitar with

too-little angle, and didn't want to CUT the neck off and start again !!!!!

(Go here to see me with this guitar: http://www.tagworld.com/iondrive )

Cheers

green_axeman

(Australia)