Tezifon

this is going to be a hard month to win the contest

Ive seen a few silver EMG's on ebay also

thats the aniversary model, i remember saw they in gold too

desert combat all the way mon

http://www.desertcombat.com/ScreenShots/dc/16.jpg

a pgm¿?

about the balsa wood thing i readed gibson use it in some series and wanted to try it, i hardened it with white glue and seem solid

i prefer a valve amp, the laney lc15 is affordable and has more power that it seems

im doing it, basically i use balsa wood+ hard wood top + epoxy

very goood neck mon

http://www.madinter.com/

madinter, wood supplier for luthiers in spain, more oriented to non fretted instruments

the pickup zone is now routed so i will beging now to fill that part with balsa + laminate

i will fill the pickup zone with balsa wood remated with laminate, the trem pool hand the bridge zone with hard wood

i got a basswood strato S-pool routed and was wondering the best method to convert it to rear routed and hardtail, is pretty the same like the fr to ht tutorial, i got some questions

i got spare pieces of beech wood, is a good election to fill??

some friend suggested me to put a top piece in the guitar, it can result fine with basswood?

the internal routings are bad ones so blocks of wood dont fill fine, whats best, use shims of some other wood or re-rout?

im open to sintetic materials and cheap ones, i have 1 mm aluminium sheets that i can use

i will install a humbucker in bridge and maybe a rail pickup in neck, the guitar is going to be use to trash and death metal so the tone is not fundamental in this one

and thanks for the sustainer scheme¡¡ i im going to do it in this one!

the grx, and put a sheet metal pickguard too

and this can´t be used with other techniques?

i think, a Crakleburst can be awesome, center in white with orange-Uv green cracked sunburst

i readed a topic about it in the jackson charvel forum, it was originated in the neal moser forum about woods i think its interesting

i will stop this from some time, i need to save from a bass

the strat is like the ak47 in the guitar world

the total that i got is 635mms, i liked to buy an steinberger, an some kramers, but the shipping to spain kill me

the desing in the semiheadless is interesting, but i think that the head had resonance

i haven´t experience with tension in short scale, it can be a problem? or can help to get strength in the fingers?

i have done a template, is a ibanez S stile body, this is still in the plan phase

i pass a lot of time in front of the pc and the room and my brother pc dont let me enough space to play in the chair, so, why not build a mini guitar?

the design wil be neck thru, i was searching thinks like this and the only ones i found where the dean mini, but i got luck and founded this babies in the japanese esp web

i prefer the very short scale approach better to try to do a steinberger desing or some else

esp edwards mini

i would go with a single humbucker 520mm/22frets neck maybe scalloped, and use some sintetic materials

the hard stuff will be the tuners i think...

some ideas¿?

gibson 500t all the way

i dont drive but in gran turismo my preference is a 6 speed always

was happened to the ¨metal g3¨rumor, with wylde and some other?

it can be pretty cool

why the violins still uses that **** of tuners?

erradicate the pink finish, block the holes and begin to route, it seems fine to me

why not try yo find a ibanez zr tremolo for it?, it can be awesome for slayer tipe of music i think...

it seems like the neal moser new models, awesome work man