Robert
-
Posts
3 -
Joined
-
Last visited
Content Type
Profiles
News and Information
Tutorials
Product Reviews
Supplier Listings
Articles
Guitar Of The Month
Links and Resources
Forums
Gallery
Downloads
Posts posted by Robert
-
-
Thanks for the sequence. Next order to Stew Mac includes that video. Now I have to find a VCR. I seem to have retired mine looooong ago.
Robert
-
I am going to do my first fret job on a guitar I am building. I am building a neck jig clone and a fret miter box. First is familiar to most or all of you. Second is the first generation one by Luthiers Merch. So the questions.
Do I have the right sequence for fretting and dressing? This is a bolt on neck for a P Bass
Radius sand the fretboard
Cut the fret slots...I and using matching curved guides for the fret saw...ie 7.25"..I am thinking I should do this to not show overly deep fret slots
Taper the board
Using guide pins glue the board
Press in frets..I have an arbor press and a fret caul from Stew Mac
Cut and install the nut
Mount the neck on a psuedo body on the neck jig
String and tune
Adjust the truss rod for correct relief....Numbers anyone??
Restring and retune...
Adjust jig for this position
Level the frets using a fret rocker
Destring and detension neck from jig
Recrown tops and dress ends of frets
Polish frets
Admire a job well done with at least one cold one
Also can anyone help me with a color question. I am using swamp/southern ash for the body and need a sorta formula to tint the finish to Fender Butterscotch Blonde. I am going to use Trans Tint Vintage Amber and Red Mahogany to start and located a Fender PBass in Butterscotch I can match. I will be using epoxy silica filler. Then either a couple coats of KTM-9 and the one or more coats of alcohol/tint and another clear coat. If needed more alcohol/tint and the rest of the clear coats to get the prescribed 10 coats. Or I may just tint the first couple coats. Suggestions???
I will be getting the KTM-9 next week and have a bunch of scrap Swamp Ash to try.
Thanks for any help...
Robert
Stew-mac Neck Jig
in Tools and Shop Chat
Posted
I just got a copy of Stew Macs Fretting Book and it has a couple of other styles. One is a box with the jig inside and you roll the box 90 degrees on its side to go to the "playing" position. Supposidlly portable. I am in the process of cloning one of these bad boys to make bolt on necks and test picups.
Robert