Vincent52

A consensious make my deceision easier. I will get on inventing a 12" radius plane.

Where can I get a good spoke shave and/or a good draw knife? They are not availble in the local stores. Also, does anyone make a 12" radius plane. It seems that it would make it much easier to create a fret board and I did not find one on stewmac.com?

I am building a solid body guitar with access to the electronics from the back (like a LP).

Do I need to shield the entire cavity, or just the cover?

Do I need to shield the pick-up cavities and ground the bridge?

Thanks for the help.

Thanks for the quick answer. Once I finish the guitar I will share it with the forum.

I have been a frequent visitor on this site for a while, and I have found it most helpful.

I am working on a neck through the body guitar. In the begining I was planning on using a strat type bridge (non-trem), so I had no angle on the neck. I prefer TOM bridges and this brings up two questions:

1. How do you build a neck through with the angle?

and

2. Can I convert my current guitar project to a TOM?

Thanks in advance for the help.

PS I read the sticky at the top of the chat, but I need a litle more clarification.