baze7
-
Posts
67 -
Joined
-
Last visited
Content Type
Profiles
News and Information
Tutorials
Product Reviews
Supplier Listings
Articles
Guitar Of The Month
Links and Resources
Forums
Gallery
Downloads
Everything posted by baze7
-
Is there an advantage to a variable speed bandsaw?
-
So the headstock thickness is 1/2"
-
I am still trying to figure out how much of a drop (offset) there is on the headstock, anyone know?
-
Could someone please give me the width measurements of a fender neck at the nut and at the other end of the neck (not sure the proper name for it) Thanks
-
I have searched all over for a good cad drawing of a fender neck, preferably a side view, anyone know where I can find one?? Thanks
-
I did a search but couldn't find anything, I will try again with some other terms. Thanks for the help
-
How do you rout for binding on a carved top?? Do you do it before you carve the top?
-
Anyone have This Bandsaw?
-
I was looking at a 14" Ridgid for about $380. I will be mostly cutting ash and maple and some mohogany.
-
I am in debate again over a band saw. I have this Bosch jig saw, would I really be more happy with a 14" band saw. I guess I am looking for some advice of people who have both, and get your opinion.
-
So how thick should I make a neck blank?
-
What is the angle of the headstock on a fender tele??
-
Do you use bolts or screws?
-
Anyone have a good picture of the process of making a bolt on neck. In particular where the neck meets the body. Thanks
-
What about Ash body and maple top?
-
Is there a reason I shouldn't use maple for both the top and body?? Also what about using 3 woods, top middle, and back?? Thanks
-
I guess both, this will be very helpfull. Thanks
-
What is the easiest way to taper the neck, is there an how to on doing this?
-
Anyone have some tips on how to make sure the bridge is lined up correct with the neck? Thanks
-
Wht is the tool to use to make nut slots?? Is there a specific tool to buy, or is there something else that works?? Thanks
-
I am looking online to buy some orbital sandpaper bulk, but am having a hard time finding a 5" 8 hole PSA, can anyone point me in a direction?? Thanks
-
My problem is I would like a few other tools. I always have a hard time finding a jointer to use, so that is on my list, people always say a drill press is handy, so that is on my list, but maybe a band saw should be first on my list. I already have a decent router.
-
Is it worth spending the money on a band saw, or would I be better off getting a good jig saw?? Thanks
-
Can someone suggest a decent Air Spray gun. I will be doing aminly Laquer fininshing. Do I want gravity, or does it really matter?? Thanks
-
I need some advice. I have some mahogany that is about 3/4" thick. I am planning on putting a maple top on top of the mahagany; my question is how thick a typical back is. I know it varies, but like on a Tele or Les Paul. The place I got the mahogany from has some that is about 2" thick, would I be better off getting that, or possibly gluing 2 pieces of the 3/4" together, I think if I did that, you could see a seam. Thanks for the info.