bernardkk

hi all. hope everyone is fine

its been a while since my last post

will let to check,

i hv a greco lp standard,made in 1977, the headstock have had a few cracks n repair.

i am thinking of adding a volute to strengthen it, possible ?

i hv not reaaly heard of ppl adding volute to an existing guitar..

any views?

headless guitar neck for sale. was a floyd rose speedloader guitar neck

-headstock have been sawned off

-comes with double ball speedloader headpiece

-lots of fret life left

-open to all reasonable offers or first offer of $60 USD will get it.

I am fr singapore, shipping cost iwill be approx $20 usd...

please email me at tbdcco@gmail.com

as follows, i have tried my best to describe to the best of my knowledge. the wood is walnut. item is in singapore. buyer to pay shipping+ item. i accept payal.

looking to sell this item $200usd

http://imageshack.us/photo/my-images/29/19593610150115045361604.jpg/

http://imageshack.us/photo/my-images/716/19593610150115045361604.jpg/

this klein styled body is bigger then the orignal klein body as shown in the pics.....

if interested pls get back to me at tbdcco@gmail.com

check your pm bro

hi guys..

if u have ine to let go do email me at tbdcco@gmail.com .thanks

open to brands like warmoth,usacg too..

just send me your specs n asking price...

hi guys..

i have a cij japanese fender reissue strat neck for sale. it has a maple fingerboard. comes with the vintage tuners n nut already on it. no mods done. lightly used. its 21 frets.

i am looking to sell it around $250 . anyone interested? email tbdcco@gmail.com

Bump before I part it out and send to eBay.

hi bro! do u still have sperzel tuners? i gladly take it off your hands with arms wide open.... tbdcco@gmail.com !! hurry

all you need is a single pole double throw (SPDT) switch, two position, on-on. connect the middle tag to the hot output on the output jack, the left to the hot output of the volume control, and the right tag directly to the hot output of the bridge pickup (i know this will already be attached to the toggle switch). then you can switch between the two. This is also called the direct cut switch or something like that by yamaha on their RGX guitars. Hope this helps. (i can do a diagram if you need it)

hi buddy, how is the wiring diagram coming along, hope all is well..

hi guys. i have a MIK late 90's fernandes vertigo project guitar for sale/trade. the guitar originally came with a single hum in the bridge but now it have been professionally routed to a s-h-h set up. (something like a esp stephen carpenter model config) the body and headstock has been resprayed, currently due to time constraints have to give up this project. on the lower horn of the body, contours has been added for easier access to lower frets. AANJ. should be alder body. maple neck n rosewood fretboard. EVERYTHING is in except for electronics and pickups..pls take note! no electronics!

body has been sprayed off white. everything is in working order. neck is straight. will include tuners, bridge, etc..just to electronics! its a stoptail bridge. comes with body n neck.

this is strictly for DIY enthu!! players condition!

for trades,

i am looking for a

Wilkinson VSVG vintage trem,

3 dimarzio hs3 pickups,

due to condition n nature of guitar .i am very open to all cash offers , as long its reasonable i will consider it. pls email me at blueginn@hotmail.com

i am fr singapore, can give references if u need...

up for trade/sale is a vintage schecter 21-fret strat style neck. used but in relatively good condition. i cant figure out which year was this neck modelled after or what yr the neck was made. but it should be the early ninties/late eighties( or could be even earlier if i am not wrong). its the old schecter logo. the neck is maple with rosewood fingerboard. very comfy neck radius n profile. truss rod is on the neck bottom. the headstock has the SCHECTER words n the pat no: 636 768 716 969 723 and on the neck bottom there is some hand written numbers '885'.

for cash offers, something reasonable n we move from there. for trade just buzz me with what u have to offer.

i am also looking for a alvarez dana scoop cutaway..do pm me or email blueginn@hotmail.com if u have

hi, in case anyone is interested. feel free to email me. blueginn@hotmail.com

discontinued/htf > i am selling ART XTREME MULTI FX for trade/sale. its has on board 3 kinds of analog distortion n coupled with some digital effects( chorus, delay, flanger etc) . good conditon, comes with photocopied manual..

i am up for trade or a cash sale. i am looking for a mxr 10 band eq or maybe a spf red threat pedal, but then again, i am open for any stuff u might like to offer.

hi guys

not been posting for a while.. got these few stuff to trade

demeter midboost preamp

http://www.demeteramps.com/products/accessories/mb2.html

used for few months, still have box n manuals.good condition.

hoping to trade a mxr 10 band eq for it( beat up doest matter as long ti works!!)

a early moses tele ebony/graphiteneck, similar to the pic but difference in the truss rod area .http://www.chrisguitars.com/moses-tele-neck.jpg

used for a project guitar. neck comes with locking tuners. the moses logo have been removed

hoping to trade for guitar effects or stuff..pickups, metal (hi gain)based pedals

do let me know guys.thanks, just in case, i am fr singapore

thanks for the help so far...

no luck so far, i might go ask the dry cleaners,they might have sodium borate....

thanks again

hi guys

need some help here about some swirl thingy. i am fr asia,singapore to be exact, been trying like hell to find the borax thingy!!! driving me nuts...

does anyone who is from asia n has done it before wld like to advice on that? lastly, any alternative to borax?

hi guys

i am looking for dimarzio hs2/hs3. one each. used condition. if u do have and consider to sell them,drop me a mail at blueginn@hotmail.com with ur best offer and condition.thanks

if u want trade i got some necks that u mgith want to have a look

1) a washburn n2 neck( got warp....more for practising ur wood skills on this)

2)washburn mercury neck(good conditon)

hi guys

does anyone here has the means to do a brass hardtail bridge ala jet guitars style where they dont have indiviual ferrules but rather its a whole block....

need someone who can do it.....email me thanks.

blueginn@hotmail.com

hi guys

anyone here has a fernandes sustainer equiped guitar? need some help

i have a fernandes raven..but its a jap dosmetic market model.the configaration was H-S( the s being the sustainer)

the humbucker is a normal passive pu.if changing the hum to say,EMG 81.will there be any problems in using the sustainer? and wahts the wiring?

and if i rout to fit in another hum (H-H-S) any problems with the sustainer,since essentially its a H-H setup...

hope u cld help thanks

wow,could not have even get the clue without u guys.thanks.

now lets try to do it practically.will keep u guys posted on the progress.feel free to share ur further views and such.

thanks

hi

i am planing to tilt/slant my humbucker on my strat....but the thing it,does it really make a difference?

the humbucker is now in a normal postion

the problems i forsee is the alightment of the pole pieces after that ,how about the james tyler line of guitars.....their pickups are normally slanted too.....and those early kramer single humbucking guitar,how do they solve this problem.

any routing on a existing guitar ,how do u prevent serious crakcs

and lastly,compared to a normal postion humbucker,does it really has a difference

http://www.tylerguitars.com/burning_water.htm

any idea or suggestions on how to get the smear like finish...?

hi

i WTB a rg/soloist style bodies pref 550 and above for rg.trying to get a project started.do let me know what u have

PREF

>no pickguard style

>aanj NECK style

>hsh set up

>routed for floyd or ibanez edge/lo pro

but then again the above are not a must

cosmetic condition can be thrashed like hell as long no major cracks.

blueginn@hotmail.com

i am fr singapore.will absord the shipping if i have too.

i do apologise in advance if i posted in the wrong section of the forum.

anyway heres the gist..

just a crazy tot,

1)have anyone here see a guitar with a s-h configaration? meaning a hum at neck and a single at bridge. what wld be the possible tonal sounding?( i think its available on a telecaster style ala albert collins,but in a 'metal music',anyone?

2)any tried to used a bass guitar body and converted it to a guitar?again tonal difference? (i only knew john squire of stone roses had one)

3)lastly,guitar like the kramer savant or metalist or even the reverend guitars have metal parts attached internally or externally to supposely improve tone n balance sound..anyone tried it on thier own custom axes?

(

hi guys

i am looking for a warmoth guitar neck.pref ebony or maple fretboard.give me your specs and price to blueginn@hotmail.com

hi guys

i have a usa made HARPERZ(brand)n guitar neck for sale/trade.its supposely made by a luthier fr california

the neck is pretty thick,almost a jeff beck strat feel

3-aside tuner holes,no nut as yet

very little wear almost new

maple back,fretboard could be either pao ferro or rosewood.

all in very gd cond except for a small minor cosmetic ding around less than 1 mm

i have pics but cant seem to post it here

looking to trade with a moses graphite ebony neck/warmoth neck

have some grover tuners(6 in line) that i can throw in to the deal as well

drop me a line if u are interested

BLUEGINN@HOTMAIL.COM

for sale,just give me a reasonable quote

hi guys

just a interesting thought.i just read thru about this old kramer 'showster' guitar where they use both internal or external metal pieces to balance the guitar and thus improve sustain and string power.the metal pieces look like a tail fin or a metal strip on the body shape.

heres the link

http://www.vintagekramer.com/company45.htm

i was thinking,anyone here have played one b4 or owes it.izzit possible to recreate it on a project guitar?