Radius540

First of all, that offer of yours really isn't that tempting (for what should be obvious reasons). 

Second, since you didn't bother to mention which kind of 5 way switch you have, we really have no idea how to help you.

←

it is a slide switch with the pins on the left and right side onf the switch insead of being at the bottome of the switch

ok my probelm is that i dont no how to wire emg pick ups in a 5 way switch. i want to have this as, neck,neck,neck/bridge,bridge,bridge... i dont have time to buy a 3 way switch there for i need someone to help me please!

http://img.photobucket.com/albums/v195/Maiden69/DSC01026.jpg

http://img.photobucket.com/albums/v195/Maiden69/DSC01043.jpg

http://img.photobucket.com/albums/v195/Maiden69/DSC01005.jpg

http://img.photobucket.com/albums/v195/Maiden69/DSC01028.jpg

This is an example of the Dupli mirage paint.  Believe it or not the purple color is the same base, but once I shot the clear it completely dissapeared.

←

holy f*k how do u do that??? thats so freakin awesome!!!!!

what happen if u over use borax??

i have send down the finish on my guitar not to the wood but some part u can see the wood how ever, should i just paint it with a white color and swirl it or what> would the paint do the job as a wood sealer?

I have a Radius body shaped like a joe satriani model. i want to refinish it but i donno what color should i do. maybe i should try to do a swirl? even though i never did one i would like to try it out once. or any color that would match my js 2000 ideas please!

we have a pretty big one..but if that does not work do u no if i can like get guitar templates from some where?

hi i am a high school student and i have a larken router in my lab i just wandering if anyone used it to cut guitar bodys.

http://www.larkencnc.com/ this is for the info

if u know about it or used it please reply me

plus how i have a bad news which is that i droped the guitar body and a paint chiped,

←

Not very good start, isn't it????

←

meh i fxed it so its all good. only that the guitar might not sound as good because the finish cracked

Hi guys i have a gibson les paul classic ebony for sell or trade for a ibane jem. Bought in dec. 2004 and only played couple times. i recently purchased a js2000 and like it more than then les paul. If anyone is interested in buying or trading their jem for it. feel free to leave a message

lgm ur the most experienced guitar builder here and i am newbie how about u teach me what to do? lol and plus how i have a bad news which is that i droped the guitar body and a paint chiped, showing about half an inch of the wood and cracks arount it. i have already used a dremo tool to cut the cracks down to the wood and goin to fill it with auto filler in a couple days... hopefully that is a smart thing to do. i will send pic soon and show u the body

well, if the dent is very shallow, I typically try to sand it out, then I use a high build primer over it which I can block out after.  If it's a deep dent, or a chip, I sand down into it to clean it, then fill with a polyester body filler, then sand out. 

Primer is very important, rattle can primer isn't really a true primer, it's more of a top coat.  Real primers have a filler in them so they do level and can be sanded flat.

←

its a router i think...what it does is that u input an image with actual lines on it and then set the depth of how much u want to cut and it will cut out for u. it use a program called coreldraw to covert normal image to a plotter file so it will work on the machine. but it has to be a image with actual line on them. other wise it will not work.

i am just wandering if anyone is familiar with the program and can make it work so i can cut my fingerboard:P

i have a router in my woods shop used to cut stuff with a input black white image. its pretty cool but i never can transfer the image from the program "coreldraw" to a plotter file. anyone use this way to cut the fingerboard b4?

My shop has a router. u no those things that if u input a graph it cuts it for u? i dont no how to input proper image to cut the fingerboard tho...

I have a old radius that i purchased last year, but it was acutally made in 1991. and now there is alot of dents and stuff in it so i am goin to sand down the finish and get autopaint spray on it.

I have already send down some of the finish but i wont send down all of them because the spray is better if there is a hard finish to support it.

Still reqire to find the push/pull pot for the guitar. anyone know where i can find them please tell me.

Also i want to convert the input jack to be like a js jack.

I know some of u guys are interested, i am goin to put up pics soon so u guys can have a good look at the guitar.

hi i am currently working on my radius project, transfer it to a js chromeboy, but there is one thing i can't find and that is the push/pull pots on the js anyone have any idea where i could get them?

topic

want to buy it at home depot but can't find it

o nvm i am retarded. where do i get that kind of paint? i dont care how much it is cause i am just goin to steal it lol... jk

what is that? is that champion white or chrome?

Hey guys i bought a radius when i first start playing guitar and now i currently have a gibson les paul and a ibanez RG3120. so i have the radius left out to mess around with. Got any good ideas of the finish i should give it? PS: its a JS body

thanks guys

i am stupid i can't figure out how to make a pcb board out of the schematics for the guitars. so anyone can give me any pcb board sites?

topic

but man its so hard to do isn't it? at least i can not do it lol. i do wood work but not that good