Alonfire

I'm not sure about the pickups specifically. I imagine that you could run them in a normal passive circuit quite happily unless they were specifically designed to work with a pre-amp. One of the basses I have has pickups which look normal but have a super low hifi output which the pre-amp was designed to bring up to normal levels. I can't see this being the case though. Measure the DCR of the pickups and if they seem more or less normal you should be good.

Cheers

No one ?

I got a pair of these from ebay recently but have only the pickups.

Do i need the equalizer etc to wire these or could I wire these with just a vol and tone ?

Sorted .

I started using Spraymax 2K clear in a rattle can and am impressed with the results . I always sand and polish by hand but thought I'd have a go with a small polishing mop in the pillar drill and the initial results looked great and very shiney . I carried on using 3M finnesse on the body and gave it a wipe over when done and noticed it was very dull .

I now can't get a shine on the thing no matter what I do it just looks dull and slightly opaque. I cleared the body about a week ago. Where did i go wrong ?

PS the bits i did first still have a shine.

My mate Jaden over at Guitar Workshop thought it'd be a good idea to post this on here.

Its a custom jem body and neck.

Sorry for the poor quality pics.