invisibledemon

was wondering if it would be good to wire them as two seperate entities.

basically a volume knob, tone, and a switch to change form single coil to dual coil for each humbucker.

possible?

Wow, those tuners fit better than cross in a church.

looks good. cant wait to see the body, should've done a before and after weigh in. lol.

Just a quick update.

Ordered a Schaller roller bridge

spent 3 hours yesterday trying to find the paint that i want. found it and have to order it.

ordered my Q-tuners, four wire, and still looking at/for different options on how to run them.

i do have to say that Erno at Q-tuners, exceptional customer service. emailed him asking a few questions about the pickups and it was maybe close to 10 or 11 pm where they are located if not later, yet i still recieved a response about 30 min after i sent.

other than that, its still waiting for parts. did a little more sanding, and should be ready for prime and paint in the next few days.

where can i find info on different ways to wire them and the advantages?

looking for some info on what the advantages or disadvantages would be of each.

looking to get a set of q-tuners in the near future, and it says to specify id you want 2 wire or 4 wire.

dont really know the answer, lol. its the BL-4 set that im going to get.

thanks,

and dave, im waiting until i get the neck in, should hopefully be here this weekend, to get it mocked up and figure the placement for the bridge.

any advice as to where i can find a place to tell me how far the bridge should be from the nut?

thats the only thing im missing.

and i love having money, but i love guitars and bass just the same, its a constant battle between good and evil. lol.

Came across this bass:

liked the body, but couldnt find any information about the company other than it was a japanese company called cipher, distributed in the US under the name Intermark. and its around 1960's era.

thats the only before pic i have, i took everything off, the neck was wasted, and the electronics beyond repair.

so this is how it sits right now:

filling in the holes and deep scars, still have to sand down the sides.

bought a used ibanez neck:

Plans are:

for the time being im going to replace the inlays with black dots,

12th and 24th fret will have a red bar inlay.

eventually it will be a clean (inlay free) bloodwood fretboard

Carbon fiber pickguard

Q-tuners humbucker pickups

Schaller roller bridge

and finally a Burnt orange finish.

I believe thats all. for now