sponboy

Hi,

Sorry, I've just realised how badly I worded my post. What I meant was, where on the circuit is the output? I know where to put it to on the switch and everything I just don't know where it should come from on the board.

http://www.pixografix.de/sustainer/FRS777-schematic.jpg

That is the schematic I have worked from, appart from the layout of the 3PDT switch.

I have also changed the layout of my circuit as suggested.

I have also just had the thought, if I were to wire the "output" of the circuit between the 220uf capacitor and the dpdt switch, would that be a reasonable/suitable place? As from what I understand the 3PDT true bypass switching grounds the circuit input?

Sorry if any of that doesn't make sense.

Cheers,

Kris.

I've started this topic as I have created my own Sustainer Circuit bassed on FoneBone's "FRS777" circuit.

This may seem like a rookie mistake but ive got no idea where on the circuit to put the output, and was thinking maybe one of the gurus on here could take a look at my circuit and help me out.

That is my circuit. As I said, I've got no idea where to put the output, and I know its probably really simple but I'm not sure.

Any help would be much appreciated.

Kris.