leod_74

What are the general dimensions of a Rhoads V? Width of body at neck, bridge and neck pickups, points?

Thanks!

Wheres a good place to get an AutoCad program. I used it in school and loved it but can not find it anywhere?

Yeah I know, I know... I will never use any of the options except the normal pickups but I am looking to make this one weird assed Tele to catch the eye and to sell.

Thanks for the help!

Huh...

Heres the Hill. There are differences but still look similar.

Hill

That guitar that you showed as a model for yours is a Hill, right? If it is, I played that guitar and was this close to buying it. Its one awesome piece of work. Hill is a local maker for me.

Yeah on the pu switch. I want a pos for the bridge, both, neck , and then both in parallel. But the switch does that on its own. What I'm having trouble with is trying to figure out how to do a S/P and a phase reverse on the bridge humbucker and then running it into the 4 way.

All of the switches and knobs go as follows:

2 pu's at the neck that can be selected by an on/on/on switch. These 2 pu's each have their own volume control. After they go through the volumes and then the swich the sginal goes directly into the switch.

The bridge humbucker is what I can't figure out. It too has its own volume.

Then after everything goes through the pu switch it goes into a master volume and master tone.

Is that confusing? hahaha

I'm new here so be gentle haha...

Can anyone help with wiring for a guitar that has a humbucker at the bridge and a single coil at the neck. The bridge Humbucker is to be coil tapp (or series parallel) AND have a phase switch on it. There is nothing going on on the neck pu. The pickup switch is a fender 4-way tele switch.

ANY help at all would be great!

Thanks