strat80hm

Thanks everyone.

So i guess i m gonna go with the Vintage: 6 screws may be safer than two poles on that soft basswood body, already weakened by the 2 original holes. And i have a vintage on my main guitar and do not encounter any tuning pb.

Yup, Frudua has always tons of good advices!

Hey there,
I have a question in my head these days, i thought maybe you could help me decide:

in my situation (see below), should i get a vintage or a standard vibrato block?

Situation
- i m rebuilding a "perfect" guitar (for me) starting from a basswood Fender body with a straight 24 fret Fender neck. http://s1237.photobucket.com/user/strat80hm/library/Strat%20HM%20Blue/#/user/strat80hm/library/Strat%20HM%20Blue?sort=3&page=1&_suid=136855920574306923632957944514

- my perfect guitar should not ask for a tool box to tune or change a string, and should allow me to play behind the nut, and should look as close as a regular everyday Strat as possible.
- this Strat is mounted with a black bulky double locking system (a Kahler Spyder) with routed cavity for pulling.
- this vibrato is mounted on 2 poles which are about 2' 7/8" apart.

Plan
- to install a classic vibrato block (no locking) with piezo captor (LR Baggs X-Bridge because it sounds nice and cost less than other brands). http://www.lrbaggs.com/pickups/electric-guitar-acoustic-pickup
- the Vintage version has 6 screws (2 1/8 wide) while the Standard had 2 poles (2 1/16 apart).
- because of the difference of size with the Kahler, i m going to have to fill up the existing holes for the poles and drill new holes.
- because of the routing, i might also have to fill-up at least the front part of the recess (where the poles are).
- i like my vibrato block floating -which i do by setting it "slanted" (a la Jeff Beck)- so it doesnt not necessarily need a recessed body, although i m not against the idea of setting it "flat" and take advantage of the already existing route for pull-ups.
- I like the Vintage system better, especially the thin threaded vibrato bar.

Questions
- given the strong string/spring tension involved, and the potential "fragility" of having to glue a new piece of wood to accommodate new poles/screws, is the 6 screws-Vintage system the right choice in my situation?
- what s sturdier: 6 screws or 2 poles?
- any specific kind of wood i should use for (partially) filling up the routed part?

Thanks for sharing thoughts and clearing up confusion.