Jump to content
Voting in Guitar of the Month April 2024 is now open! ×

spottydog

Established Member
 View Profile  See their activity

  • Posts

    163

  • Joined

  • Last visited

  • Days Won

    3

 Content Type 

Everything posted by spottydog

  1. spottydog
    Update on build. Have now joined and sanded boards flat and have joined two boards together to make body. On the bottom board I have routed out channels to run wires through for pick ups ect. Not shown on the pic but there is a lat both top and bottom across board to help keep it straight.
  2. spottydog
    Hi, Not much done on new guitar of late. I have been busy helping a friend to build new counters and fit out his new shop and have been making a bird table for my partners sister. I hope to get back to the guitar soon and will post an update as soon as I can.
  3. spottydog
    Thanks for your comments. It does make more sense to make templates. I thought it was a waste of time but believe me it is not it is the best way to make a guitar. I have also been able to put the templates together to get a good idea of what the finished guitar will look like and how it will eventually go together when the separate parts are finished.
  4. spottydog
    I have now finished making my patterns from 8mm MDF. The half pattern is hardboard as it is only to use to mark the positions of the switches as I am now not fitting a scratch plate as per the plan I have. I have also made (Pattern without paper on middle of pic) a cavity cover pattern from two pieces of MDF glued together and cut larger than the cavity cut out.
  5. spottydog
    without a doubt Prostheta I learned a great deal from my first build so my next one will be much better. I hope to build most of my guitars from reclaimed/recycled wood if I can get hold of enough wood to build with.
  6. spottydog
    It sounds ok. More towards sounding bright like a telecaster, though the action is a little on the high side
  7. spottydog
    Now I have finished my Jr guitar I am starting my new project. A flying V style guitar from pallet wood if I can get hold of some old pallets.
  8. spottydog
    Here are some pics of the finished guitar it is a 59 Les Paul Jr. It was made entirely from an old round table top. The neck was made from strips cut down as was the fret board which was cut to thickness and sanded from an 18mm thick piece of table. All of the veneers for the headstock and the scratch plate were made in the same way as were the cavity covers. As it is all made from an old table top it is not a Les Paul but rather a "Tay Paul Jr. guitar".
  9. spottydog
    Thanks for tips. Radius is 12 inches. The fingerboard cut rom a piece of oak using a bandsaw. The dots are sparkle I got off e bay Sorry took so long to reply my internet has been off. The guitar is now complete and I will post some pics shortly
  10. spottydog
    This is a pic of my neck so far. It has a flat spot in the middle the only way I can think of getting rid of it is to take out the frets sand and re fret
  11. spottydog
    Hi. When I started the build I made my patterns from hard board as I had some laid around. Next time I will use MDF as I have found that the board is much too soft when using it with a router with the bit tending to go where it wants rather than follow the pattern. A valuable lesson has been learned and also many others as I continue my Les Paul Jr build.
  12. spottydog
    Thanks ScottR. Have tried post pics but keeps saying files too big
  13. spottydog
    Hi. I have built a couple of kit guitars and now I am starting on my first build from scratch. I am attempting to make a Les Paul style guitar using an old oak table top. I have started with the neck which is about half finished. It looks ok but not as good as I had hoped. There are a few mistakes on it. Also I read that you should fret the fretboard prior to fixing it to the neck which I have done and now wish I hadn't as it would have been easier without the frets in place. I'm not sure how I can sort this out. I guess I can always make a second neck. Watch this space ????
×
×
  • Create New...