kevlahnota
-
Posts
5 -
Joined
-
Last visited
Content Type
Profiles
News and Information
Tutorials
Product Reviews
Supplier Listings
Articles
Guitar Of The Month
Links and Resources
Forums
Gallery
Downloads
Posts posted by kevlahnota
-
-
i already repaint it with a black acrylic lacquer. apply the decal already. so i have a nitro lacquer(spray can). can i use a nitro over acrylic? or i will have to buy an acrylic lacquer?
here some update:
-
It is most probably screen printed so a bit of a rub with cutting paste should take it off without too much of a problem. Just be careful not to hit the rest of the logo. If it is under the laquer, I would mask the area and spray it black then do one more coat of clear over the whole headstock.
thanks for the input.
-
i want to remove the "GIO" logo on my guitar without sanding it. is it possible? or i will lightly sand it then just spray over the stock logo with black paint and put a new decal on it then top coat it with clear. need some suggestions. some pics...
-
i just recently finish my guitar using an acrylic epoxy lacquer (rattle can). the can doesn't say how long it will cure. anyone have info how much time i will wait before buffing it? the brand name of the paint is bosney. thanks in advance.
Removing Headstock Logo...
in Inlays and Finishing Chat
Posted
i shot about 2 thin coats of nitro. it seems fine. i'll put more coats after because i run out of nitro. thanks for the help guys. here it is: