mammoth guitars
-
Posts
522 -
Joined
-
Last visited
Content Type
Profiles
News and Information
Tutorials
Product Reviews
Supplier Listings
Articles
Guitar Of The Month
Links and Resources
Forums
Gallery
Downloads
Posts posted by mammoth guitars
-
-
I will put this in order of quality aftermarket necks from best and less...
Warmoth, USACG - these guys both make high quality parts
Allparts
WD
Mighty Mite
-
Does that amp use a stereo 1/4 inch jack for the footswitch? You may want to try a Cliff replacement switch
Bolt On Neck - Minimum Spread Of Screws?
in Solidbody Guitar and Bass Chat
Posted
Some of this has to do with the neck type. Warmoth makes necks with a side trust rod fine adjustment. So you cannot put the screws in much more than the standard locations. However without this issue a good rule of thumb is at least 1 inch apart in the width and 2 inches apart along the length. The trusrod channel is typcially 1/4 inch and in most cases extends nearly to the end of the neck. A standard neck plate places the screws at the outmost corners but this is not neccessary. When using neck furrules the screw locations are moved in about 1/4 inch.