aboubou

Hello !
I finally found the time to achieve my project. I used this diagram, with 3 caps 0,022ù :




And unfortunately it doesn't work like it should. The 2 mini toggle switches are totally ineffective, and the positions of the 5way switch are not ok.


I should have:

1 bridge
2 bridge and neck out of phase parallel
3 bridge and neck in phase parallel
4 bridge and neck in phase in series
5 neck


And I have:

1 bridge
2 neck with no treble
3 bridge and neck: parallel or serie I don't know
4 bridge
5 neck


Has someone an idea to solve the situation ?

Cheers

Amaury

That's really cool man ! I really Appreciate, and can't wait to try it !

Hi,

Another caprice, do you think it is possible to add a bypass straight to the output for the neck PU, with a push/pull on the vol pot?

The idea is to make a bridge PU blend in

Another question : have I to connect the métal housing of the neck PU to ground ? 

Hi Curtisa, Thank you really much for the time you spend doing it. I really apreciate ! Will try it (in à few weeks, still have to build thé guitar body !) and let you know. 

Thanks again. If you have any advice or suggestion, don't hesitate ! 

Thanks Curtisa ! 

It progress next step,  would like to add a toggle switch for the low cut, or a push-pull pot if it's simplier. Do you have a clue ? 

Hi, 

No I don't mean "dark tone" like early tele, but 50s wiring, like Gibson did, I think. 

The full shema that I post is taken from the website that you post (official schaller site...) So I think it's ok. Visualy it's not clear cause there are two soldering sides, that are mixed on the drawing. Search a picture on the net and you will understand. 

Here is the diagram from Schaller.

Hello every one !

I'm building a tele guitar, and I would like to have some nice electronic feature. Like a low cut on a mini toggle switch (+-160Hz), and the possibility to switch 50s/modern wiring via a mini toggle switch too. I'll use a Schaller megaswitch M.
But I really don't know how to configure it right, and which cap to choose. Any advise is welcome.

Here is the incomplete wiring diagram... if some one could help me to fill it, it would be very appreciated ! :-)

Amaury