bluzzman

OOPPSS forgot to add the link . http://cgi.ebay.com/ws/eBayISAPI.dll?ViewI...A:IT&ih=008

Thanks for the info and the insite. I came upon this on ebay dose anybody have experiance with this unit. Or an opinion from a technical point of view.

Try wipping the staticie area with one of those static removeing fabric softener dryer clothes, that worked for me.

I hope you will excuse my lack of technical abilities when asking for this info but in my 40 years of playing guitar this is the one area of the instrument I have shyed away from. With that said I recently bought an Agile 2800 and replaced the origenal humbuckers with two DiMarzios The PAF Joe in the bridge and a Fred in the neck , that was not too hard but I would like to be able to split these to get single coil tones. Could someone give me some guidance in this area : switches, pots , resistance , wireing ,etc,etc Thanks guys I really do appreciate any help.

I have had this problem a few times.

It was always the ground to the bridge that wasnt soldered good enough to the back of the volume pot.

Id almost gaurantee that will be the problem...

Regards

Mark

Thanks Mark I'll resolder.

I have a strat copy made by Lotus the only thing that is original on it I think is the wood, anyways it has this annoying scratching or clicking sound that it makes every time I touch the strings, pups, or anything meta,l its very quiet otherwise. Over the years I replaced the pups with Rio Grande vintage Tallboys, and the bridge with a Baggs X Bridge passive stereo . I think this noise started after the pup replacement Any ideas on a remedy? Thanks Bluzzman.