spazzyone

Hi all

i just got a cellphone for my brother in law and it came with this

http://www.cell-phone-antenna-booster-whol...ion-shield.html

it is suppossed to cancel EMI its also perfect in size in that 2 wide would cover a pickup

is it worth looking into?

a good hammer to smack the Cheif in the head with

cause nothing i do is free. so kill them all and let Wes sort them out

Alright. Whatever.

rudeness will get you nowhere

I think I've already have picked up more than $10 worth of information off of this message board. But then I saw where several people wrote things like "hey I paid my money a week ago and I still can't get in". Plus, I did'nt really see what I was looking for.

thats because the addministrator is busy and those people probably made a non cash donation

and think the post office is an instant thing

and you did not see what you were looking for because the search function will not include the

download section

so if you have picked up more than the $10 worth of information why not donate

or are you one of those people who think why pay if its free and still complain they dont get enough

(1/4" is a tuff bend).

Peace,Rich

+1

and your contour has a sharp bend (at least in the rendering)

which needs a very soft transistion

this is a more common problem than some would like to admit

but ive seen it happen to 3 tops in two months

this will get you the basics and up to speed on drivers

http://projectguitar.ibforums.com/index.php?showtopic=16984

Thanks for the help Drak.

Your response tells me I was on the right track to begin with in regards to "scale legnth" and that there really is no "magic template" or anything.

Thanks again for the help.

What the F$%k no "magic template"?

now what am i gonna do

Oh Christ!!!!!!!!!!!!!!!!!!!!!!!!!!

very judas preist

you mean very Krokus

i know i did not cave anything as im not making the rules

but

"He is a completely innapropriate entry, END OF STORY"

that is well said

but i have looked at his site (what he has posted anyway "dreamtone.org")

and it makes me wonder how he is a newbie that knows nothing

and this is a direct quote from his mini jcm 800 build

"This kit is not for a beginner or armature and It is not intended for your first diy amp build. Electrical skills, knowledge and safety are all needed to build this kit"

so either he is no beginer or does not listen to his own advice

very nice

love that abalone contrast like its jumping out at you

"Made of precision-machined aluminum and brass, it's great for routing the edges of archtop instruments, where a standard router base won't work. It installs easily on Dremel MultiPro™ or Professional rotary tools (and Black & Decker Wizard™/RTX™ tools), replacing the threaded plastic collar on the tool housing (fits 12 threads per inch)"

most likely yes

count the threads on yours

if there is no glue joint

just dab some water on the dent/ding and put the iron on it

a little at a time till it pops back up

dont hlod it there too long though....it realy do's not take much

4

For example, is it the placement of the string trees, the height of the trees, the angle the string breaks over the nut, spring tension on tremolo, whether its fixed.... so on and so on.

all the above

drill the corners out with a brad point drill bit first

then do your route

dual action...simply put

not only does it work well it also works in reverse (the main reason they were invented)

no upbow or backbow just total control over the neck!

and we place our's right under the board as well no problems

and we make some thin ass profiles to boot

and $50 is not bad for a long scale slotted board when you consider a high quality ebony blank cost that much with no slots or radius

sheilding will eliminate noise but not single coil hum

you could remove the cover and sheild the inside of it

and it will help but not eliminate the hum

no

although i do sheild mine when i place batteries in the cavity

these are great necks also

many options availible as well

http://musikraft.3dcartstores.com/

But hopefully we can reach a compromise that suits most people and maximises the amount of entries, that's the most important thing in my opinion.

thats what i would like to see

his problem is what drives me up a wall and thats that dredded g string

you need an Earvana nut or Buzz Feiton

why?i thought about this for a few minutes and the reason i think it is fair is because some of you guys will be buying already planed,thicknessed,and glued blanks to work with because some of you don't have a regular wood shop.

that leaves alot on the table if people are buying "Pre Made" anything other than hardware

but whatever im game

and a paul or prs is cool

We could always make the rules of the competition that you have to make YOUR OWN design,

then design becoms a factor........that is guitar of the month

Can't we all just get along HA.HA

i made my three sugetions based on what i would make for my next build on my own

and just added them as my ideas. but i am not limited to them

the Fender,Gibson,PRS idea was not bad

but so far i dont see enough people to make that happen

i will go back into my hole and let the judges make the descision's

like was the thought when that post was closed

i also agree with Drak's opinion's as he holds some very valid points

so Drak if your not in why not be a judge as you seem to have more input than most

Wes get control of us please or close the compition as it is getting to bickering

my$.02

+1 on the straitedge Mattia

.800 with a .260 board if you wnat to be exact

thats before radiusing or shaping