-
Posts
91 -
Joined
-
Last visited
Content Type
Profiles
News and Information
Tutorials
Product Reviews
Supplier Listings
Articles
Guitar Of The Month
Links and Resources
Forums
Gallery
Downloads
Posts posted by prauny
-
-
ok, ive tried it on a block inlay and it doesnt look that great. I would probably stick to using it for dots only. Its looks to messy in a block inlay anyway.
-
Im about to try this in a block inlay, i'll post the pictures when ive done it.
-
I'm having serious issues with planing a straight edge on a bookmatched quilt top. I'm guessing that it's because of the way the wood has grown but I can't seem to get a good clean cut with it...it seems like the grain is going in all directions & the plane is either digging in or skipping across the surface.
are there any tips or techniques that I should be using, I'm using a long jack plane about 12" long (maybe longer)
If you plaining, use the longest plain you can find. But if the wood is getting chewed up and the plain keeps sticking, i would go for the sanding block. Also try sharpening you plain blade.
-
heres a post with a very helpfull picture and explination...
-
neck angle is determined by scale length & bridge height, it's not just something that is decided for design purposes.
Les Paul's have a neck angle because the bridge is so high, Strat's don't have a neck angle because the bridge is quite low. Some SG's have the fingerboard higher & no neck angle....so asking for the neck angle of a PRS is irrelevent unless you make an exact copy & use the exact same hardware.
Thats not really helpfull is it mate. If you dont have an answer to the blokes question, why post a reply?
Ok mate, there are a few posts in this forum detailing how to work out the neck angle for any type of guitar. I would suggest you look back a few pages and you'll find what your looking for.
-
flamed maple fretboards look cool, im working on one at the moment, although it doesnt have a realy high grade flame i guess
Thats just what mine looks like too mate. Should look great once its sanded and stuff.
-
I have a nice piece of flamed rock maple which is only usable as a fretboard (too thin and small for anything else). Would a maple fret board be a good idea for a mahogony neck and body? Any ideas what it would do to the tone? The guitar i plan will probably be a les paul'ish design with two humbuckers.
Maple will give you slightly more attack on the notes when used as fretboard (compared to RoseWood)
I doubt that you would hear much of a difference in tone. Finish with tung or danish oil and wax. I don't like lacquered boards.
Will that help bring out the flame in the wood?
-
I have modified some normal black pickup rings before by adding 3 ply b/w/b scratchplate material to the sides to widen them. I wouldnt reccomend it for all guitars but on the one i did it to it looked quite classy. I dont have a better pic but you can just about see the white stripe here on one of my older guitars
mmmmmmm spalted?
-
There's a new PRS Signature guitar with a maple 'board. Might be some sound clips around? I know its a bit of a different guitar but for seeing what difference it has 'generally' look at a strat.
S
I've never played a guitar with a maple board on it. Id like to know how it feels and stuff as well. We only have one guitar shop in Aber, and they dont like people playing the guitars..... it sucks....
-
They don't, but *you* can. Wooden pickup rings can look very classy, and be any size you choose to make 'em.
These are wenge:
Those pickups rings look sweet setch, did you make them? Its a good use for nice wood thats not really big enough for anything else.
-
Indeed, Aber rocks!!! I live up here, have done for about seven years now.
What effect do you think it had on the sound prs man? or how it played?
-
Yeah, and ive seen maple fretboards on Warmoth les paul necks too. I like the look. Just wondered what it would do to the sound really. I will be using it anyway. I'll try and get a picture up of it.
Its actually a really old floor board that was being thrown out. Skips are wonderfull things!!!
Hey Sambo, im in Aberystwyth. Do you build guitars?
-
This may be completely off track, but ive seen bolt on SG's and they seem to have practicly NO sides to their neck pocket. At least the part of the neck with the fret board on anyway has no sides to it.
-
The old Gibson 'The Paul' was made from Walnut. Ive not heard it mtself, but people tell me its sounded great.
-
I have a nice piece of flamed rock maple which is only usable as a fretboard (too thin and small for anything else). Would a maple fret board be a good idea for a mahogony neck and body? Any ideas what it would do to the tone? The guitar i plan will probably be a les paul'ish design with two humbuckers.
-
I would use Stew-Mac's Cherry Colortone liquid dye, and mix it in with an oil based pore filler (which you need to do anyway) so you will pore fill and dye all at the same time.
BTW, how can you make a guitar body and have NO scrap wood left over from the blank?
Did you throw it all away?
If so, that was a bad move, because you need some scrap to find out how strong to make your dye before you put it on the guitar.
Yes its sapele mate, cheap at the moment, free for me
I cut the body in a mates workshop, and the work shop is far far away. I can get hold of the off cuts, but i'd have to wait. I just wanted to know what type of dye to use for my type of wood, and as i already have the water dye i wondered if that would do. Dont worry mate, im not about to just slap the dye on the body without testing it out first. And thanks for the tips dude
-
I cant make tinted finishes mate, but thanks for your input.
Its going to be a wine red colour so it seems that i'll be ok.
-
I have made a strat body from african mahogany, and would like to dye it. Is there a good dye for this type of wood? I have some water dye at the moment, but i dont want to try it only to find it does'nt dye evenly and mess it up. Any info? I also dont have scraps to try it out on...
-
Its just a small chip in the front of the guitar, about 5mm long and wide. A little white around the edges. Its where the screw holding the gaurd onto the bracket has been pressed into the guitar top.
Sorry, no pictures as my camera wont take pictures closer than a metre.
-
-
Its under the scratch plate, and its the only reason ive not removed the scratch plate (its a les paul copy) as i prefer it without the plate. How can i repair this? Ive read that poly is not easy to spot repair, but ive read about using nail varnish to fill small chips and dents. Would that work on poly?
Thanks in advance
-
Ive heard of people putting masking tape on the spot where they want the hole to minimise cracking. Its meant to work well.
-
Its also known as Baby oil (the baby oil has been fragranced). Would it be a wise move to use baby oil as a fret board conditioner?
-
Is it possible to make a fretboard out of poplar? I mean, I know it is possible but is it practical? will it just fall apart or anything? Thanks for any information.
I dont see why it should'nt work mate. If it can stand the strain of having the string tention as a body, it should be fine as a fret board. I dont know how it would effect the sound though.
Ca And Baking Soda
in Inlays and Finishing Chat
Posted
I'll put up a picture tomorow, my camera wont take a close enough photo so i'll have to use the one at work.