zfrittz6

I feel much not to be able to enlarge it, but I explain to you, is like the fine conductors, single who irian projections right between the cords with different polarity, therefore aprovecharia the magnetism of both extreme of the coil, simultaneously that tirarian upwards and downwards of them. As I can put images but great, nonencounter the form to do it? Also I am investigating Frequency controlled gain amplifiers

If estube watching the one of ebow and also I already think that it can be a good idea. There are also small batteries with enough capacity and I believe that they are possible to be mounted in guiotarra taking advantage of all the hollows possible and with a connector to recharge them. also I am trying another type of conductor so that the cords of the guitar move ariba down and, instead of inside it go, to see that it seems to you.

That so the circuit proposed by curtisa with lm 324 goes?. If it works well it will prove to make it in SMD along with the amplifier, with printed circuit of double slide, to occupy the minimum space, and it will use commutators of which take walkman them, very small, to mount it everything in the conductor, not to have as soon as to modify the good guitar that I have she is one jem 555 of ibanez and the truth I do not want to touch it until not this all perfect one and with the minimum possible modifications. The truth is that for this project it is necessary to modify enough the guitars, unless utilizemos some box outside her, for the batteries and the circuits, I have been able to put it everything in the guitar who I have bought for this project, which me 100 cost €, and have had it to modify completely to put the batteries, hollowing the wood, and the amplifier hize in smd and I have the conductor along with. greetings.

and if a compressor were used like which a small equalizador is tried but? Because I probe a equalizador of that they take walkman them with three potentiometers or ranks in stere using two conductors and two lm386 one for all the cords and another one lm386 with its filter for acute notes but and also I work well, although now with tda 2822 I do not need it, in exchange for but battery consumption, although for that I use 6 batteries of 2 amperes and lasts enough.

the scheme This in datasheep of tda 2822 is that not like extending it, excuses. Greetings

This it is the circuit that I am using by far better result than lm386. I do not use preamplifier I I use single the power stage. and enough good goes.

hello, to all me has been happened an idea that I have not seen that it has been proven, and it is that, that pasaria if a harvesting upon the one becomes of the center that has the guitar to use it with the conductor, totally independent of the circuit of the guitar? And to use it like in ebow, everything totally independent, podria to occur him around 1000 returns for the harvesting with fine thread, more or less like in ebow and using our conductors, or somebody has proven it? hello, bancika The thread for the coil that this giving better result is of 0.2 mm to 0.24. Greetings. PSW, in previous post you asked me for the tin that I use to cover the conductor and to isolate EMI, or rather to lead it, I have of decirte that is the one of tins of pepsi and they are not of aluminum since they are atraidas by the magnet, so, I think that iron or steel would seran of some alloy with, I am not safe, greetings and I animate because we are obtaining it.

PSW. the measures of the magnet that I use are of 5.5 cm. in length, 0.3 cm. wide and 0,5cm of stop, everything with enough plates removed from the softdrink cans to isolate EMI and works perfectly, also to say that it reaches the conclusion that at least clean circuit and but is better, because utilize in principle the fetzel-ruby and tapeworm too much noise and probe with my rp-6 of digitech in clean with lm386 and worked enough good, so buys an amplifier of 2w and single I put that to him and is when really I work of wonder, I have to directly say also that to the coil enrrolle to the magnet trying that the thread was crossed less possible not if I explain myself that is to say, if empizo by down I am enrrollando upwards without cruzes in the thread and later downwards up to 160 returns, 8 ohms altogether. In the end without previous it does not notice either that it lowers as soon as the signal towards the amplifier. thing also I have other two bibinas done of 4 ohms each one and the measures are 3mm. by 3mm. by 5.5 cm. which I have still not proven, the nucleus of these I have done it with worn out magnet and magnetized North it arrives and the south down but I have not been able to verify its operation with my guitar which is a ibanez gem-555 and for which me vendria very well. also to say that if makes lack design pcb of some circuit in smd or normal as well as some type of electronic switch here me teneis to your disposition. Greetings.

my conductor. 5,5 cm. x 1 cm. x 1 cm. constructed with thread of 0.24, internal magnet and tin cover of pepsi cola

Greetings. I am an admirer of this thread although I do not speak English I translate with google, so pardon by the phrases that can not be done well. I take to enough time following this thread and have made enough verifications. 1 - The conductors who I have done if they enrrollan themselves anyway give origin to a cancellation of the original sound and cause the overtones, so following an order in the winding purity in the sound is obtained but, and better sustain single is necessary to pay attention to as they estan winded the commercial coils and comparing them with ours. 2 - Good results than I have obtained are using amplifier of 2W commercial without preamplifier, problem whenever I have used preamplifying has be distortion which does to decay sustain, so I think that whichever but stages are worse, as a result of the noise that is generated. This I think yet that what better works is the simplicity and not to be complicated with preamplifying AGC nor that alter the purity of the vibration of the cords, at least in my case, that I repeat as better it works to me it is just by the stage of power without previous and the good disposition of the winding. Greetings from Spain