the telecaster kid

Just got my mahogany for neck and heel. Gonna go cut the headstock pitch, and laminate on the headstock and heel. I'll have pictures tomorow.

Well now i can't find the cord for the camera, whatever, I'll post some pictures once i find it. But for now, the wood is glued, and the shape is drawn. Going back to the mill next saturday to get it cut.

Alright, found my camera, pics will be up in a minute.

Ok, ive succesfully glued it, gonna come back tomorow and see how it worked out.

I just got back from the lumber yard, where i got my wood milled, and borrowed some clamps. I'm getting ready now to glue it, and I figured this is a good enough time to post it here. I'm laminating a body together, with two pieces of ash, and two pieces of maple, the maple being in the middle. I'm going to do set mahogany neck next saturday, when I go back to the lumber yard.

Sorry, i can't find my digital camera at the moment. I'll post some pictures when i find it.

Oh yah, i got all the body wood from trees in my back yard i cut down a couple years ago. There's a long story behind why i cut them down, but in short, it's becuase there's a train going through, and I figured that I'd cut them down before the train company did.

ok, if this has been previously explained, can someone please direct me to where it is, cuz i cant find it. If not, well, id like to first apologize for my complete ignorance when it comes to this subject. I have a custom tele body, and three seymour duncan pickups, that Ii have not yet wired up.

neck- Little '59, stacked single coil

middle- hot rails, stacked single coil

bridge- sh6, humbucker

In my ideal situation, it will have three knobs, volume, tone and a black ice which ill tackle in the future. One of them will be a push pull pot, so when you pull it up, the three pickups are true single coils. Is there any way to do this?

You can't do it on a normal push pull switch as they are only double pole and so can deal with two pickups. If you are using a strat-style 3 or 5-way switch then it is possible as you use one side of the selector switch to feed the coil tap.

There is a diagram for this in my book.

Melvyn Hiscock

What if i use toggles like a jaguar or something?

ok, if this has been previously explained, can someone please direct me to where it is, cuz i cant find it. If not, well, id like to first apologize for my complete ignorance when it comes to this subject. I have a custom tele body, and three seymour duncan pickups, that Ii have not yet wired up.

neck- Little '59, stacked single coil

middle- hot rails, stacked single coil

bridge- sh6, humbucker

In my ideal situation, it will have three knobs, volume, tone and a black ice which ill tackle in the future. One of them will be a push pull pot, so when you pull it up, the three pickups are true single coils. Is there any way to do this?