ibreakemineedtobuildem

It's a translucent finish.I guess I'm wondering when you sand lacquer and it gets cloudy,do you put another coat on or do you buff it out?

I don't quite understand what I'm doing

I have 8 coats of lacquer that has a few bumps but it's enough.

So what do I do know?Sand it or let it cure before I sand it or did i miss something

I get some pics weekend.Another question?

What grain is used for leveling your finish?Also,what step comes after sanding?Assuming it's completely level.More lacquer or buffing?

PS I would go looking throught the tuts,but my net service has turned to turtle mode.

After I put another couple of coats on it looked a lot better.

So I started my Guitar.

Being my first guitar,i never knew how much the translucent stain would jump out when you get some lacquer on it,I like it.

It's a rounded out warlock idea.

2piece Mahogany

Emerald green

gold hardware

Hardtail

24 fret 2 piece maple

reverse Headstock

25 inch scale,

jumbos

PU's coming in soon I HOPE

Bridge SD invader

Neck undecided

tuners Undecided.(Good Tuner Ideas?)

I just sprayed some lacquer on a test piece and the finish was dimpled.I was just wondering if that is expected and more coats or thicker etc.....

Ever see those patio greenhouses with covers.They're only 4 feet tall?40 bucks or so.Cut a hole for a vacum and seal it.Then take the shop vac and place it outside your window.I have one and I'm gonna try it out

thanks Brian.My first guitar is almost finished.I may have to change my name if it turns out okay,cause I won't be breakin anything anymore

How big should the bolt on holes be drilled in comparison to my bolts?Should they bolts bite into the body too or just the neck?

Also I made a two piece quatered maple neck.Is there more danger of it splitting when you go into them?

Why would people be bidding up to $40 for a bc rich neck plate on ebaycanada.All it has on it is a serial #. Are people making fakes?

I've decided to eye it up and hand carve eaach hole with a shovel

i am done with body and I was wondering if I drill my string holes before I lacquer it or after.

Also,what grain sandpaper should I use after and or between lacquer coats?

It's too bad the pickups don't write and play the music.Otherwise every spoiled kid in the world would have his EMG's writing tunes like James (used to).

PS I HATE EMG 81s.i hate all active pickups.they stink.Also,how many people do you think went out and bought Emgs just because of james?Emg Made a lot o $

I thought since the elec section had nothin to do with the?,I'd join in becaus....................purple seagull cactus boing............

How much am I supposed to spray in the first coat?Also any tips on how fast to move over the surface?

go to EMG.com

Or Seymour Duncan

I like pizza

I never knew that.Good to know when you're in a rut.

I was watching Norm the carpenter guy on pbs.He had a 6x6 or something.

He cut halfway through it with a jigsaw.What kind of jigsaw can cut halfway through something?Just like a circular saw would.

I can't please my woman

That must be why I used to see reviews that would be way up and then way down.

are there two Bill Lawrence pickup companys?

maybe its good to inhale?

I have a friend who does auto body work who gave me disposable masks

(willson saf-t-fit N95) for spraying aerosol lacquer.

He says they are okay for lacquer.

Are there any all natural hard resin finishes?

could I just use just a toner instead of staining the mahogany.(i find I can't get the stain to.........stain)