albertop Posted August 23, 2004 Report Share Posted August 23, 2004 Hello, I´m making a Tele body and I will like to know what kind of rounding bit can I use, a 1/2" or something smaller? also do you think it can be done by hand? I mean just in case I couldn´t get the bit , thanks Quote Link to comment Share on other sites More sharing options...
AcousticSmash Posted August 23, 2004 Report Share Posted August 23, 2004 ya there is a way but its a lot more tedious cause it can be done with a electric sander if u know how to do it. there are router bit out there that u can use to round the edges. a local hardware store should carry them. just tell them that you need a bit that rounds edges on wood Quote Link to comment Share on other sites More sharing options...
Scott Rosenberger Posted August 23, 2004 Report Share Posted August 23, 2004 The Tele I have is 1/4" radius Roundover Quote Link to comment Share on other sites More sharing options...
albertop Posted August 24, 2004 Author Report Share Posted August 24, 2004 I would look for that 1/4" radius roundover, thanks both of you guys Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.