chriswil Posted September 12, 2004 Report Share Posted September 12, 2004 okay i need some help here i went out and foolishly bought a pawn shop guitar and sanded it down to the wood now i need to paint it and get it back to where it was, but first i wanna move the sg lead hole to where it is on a les paul then paint can anyone just help me out here? Plus i was wondering if there is anyway to re-wire pickups the pickups that came with it dont have toggle they have to white squares that move back and forth.. and i wouldnt mind haveing toggle. thanks! Quote Link to comment Share on other sites More sharing options...
68 lost souls Posted September 12, 2004 Report Share Posted September 12, 2004 I dont quite understand the toggle switch thing maybe a pic would help, but the jack placement problom is dealt with on the mainsite here http://www.projectguitar.com/tut/output.htm Quote Link to comment Share on other sites More sharing options...
lucky1 Posted September 12, 2004 Report Share Posted September 12, 2004 (edited) Edited September 19, 2004 by lucky1 Quote Link to comment Share on other sites More sharing options...
PerryL Posted September 13, 2004 Report Share Posted September 13, 2004 Yep, You should post this in electronics section but Sounds like you have slider switches in it instead of toggles for the pickups. There's someone over there that can tell you how to replace the sliders with a toggle. It should be fairly simple BUT you'll probably have to replace the pickguard though. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.